TSXMRPC002M模块，SCHNEIDER产品外观

四个字节包含板的速度，单位为MHz。前两个字节是MHz的整数和后两个字节是MHz的分数。

例如，对于25.00 MHz板，此字段包含：25006、以太网地址预留6个字节。地址存储在十六进制格式。（请参阅第4章中的详细说明。）如果电路板不支持以太网，该字段用零填充。

7、这两个字节是保留的。8.为本地SCSI ID保留两个字节。

TSXMRPC002M模块SCSI ID存储在ASCII格式。9.为印刷线路板（PWB）编号保留八个字节以ASCII格式分配给内存夹层板。但事实并非如此包括01-W前缀。例如，对于4MB奇偶校验夹层版本A，PWB字段包含：3837B02A10、为分配给内存的序列号保留八个字节ASCII格式的夹层板。11、为印刷线路板（PWB）编号保留8个字节以ASCII格式分配给串行端口2个性板。12.为分配给串行端口2的序列号保留八个字节ASCII格式的个性板。13、为电路板标识符保留八个字节，采用ASCII格式，分配至可选的第一个工业包装a。14.为序列号保留八个字节，采用ASCII格式，分配至可选的第一个工业包装a。15、印刷线路板（PWB）编号保留8个字节分配给可选的第一个行业包a。16、为电路板标识符保留八个字节，采用ASCII格式，分配至可选的第二工业包装b。17.为序列号保留八个字节，采用ASCII格式，分配至可选的第二工业包装b。18、为印刷线路板（PWB）编号保留8个字节分配给可选的第二个工业包b。为电路板标识符保留八个字节，采用ASCII格式，分配至可选的第三产业包装c。20.为序列号保留八个字节，采用ASCII格式，分配至可选的第三产业包装c。21、为印刷线路板（PWB）编号保留8个字节分配给可选的第三产业包装c。22、为电路板标识符保留八个字节，采用ASCII格式，分配至可选的第四工业包装d。23.为序列号保留八个字节，采用ASCII格式，分配至可选的第四工业包装d24、为印刷线路板（PWB）编号保留8个字节分配给可选的第四个工业包d。25、保留增长空间（65字节）。这使结构达到偶数256字节。该区域的最后一个字节保留用于校验和（如MVME162Bug调试包用户手册）用于安全和数据NVRAM配置区域的完整性。该数据存储在十六进制格式。

Four bytes contain the speed of the board in MHz. The first two bytes are

the whole number of MHz and the second two bytes are fractions of MHz.

For example, for a 25.00 MHz board, this field contains:

2500

6. Six bytes are reserved for the Ethernet address. The address is stored in

hexadecimal format. (Refer to the detailed description in Chapter 4.) If the

board does not support Ethernet, this field is filled with zeros.

7. These two bytes are reserved.

8. Two bytes are reserved for the local SCSI ID. The SCSI ID is stored in

ASCII format.

9. Eight bytes are reserved for the printed wiring board (PWB) number

assigned to the memory mezzanine board in ASCII format. This does not

include the 01-W prefix. For example, for a 4MB parity mezzanine at

revision A, the PWB field contains:

3837B02A

10. Eight bytes are reserved for the serial number assigned to the memory

mezzanine board in ASCII format.11. Eight bytes are reserved for the printed wiring board (PWB) number

assigned to the serial port 2 personality board in ASCII format.

12. Eight bytes are reserved for the serial number assigned to the serial port 2

personality board in ASCII format.

13. Eight bytes are reserved for the board identifier, in ASCII format, assigned

to the optional first IndustryPack a.

14. Eight bytes are reserved for the serial number, in ASCII format, assigned

to the optional first IndustryPack a.

15. Eight bytes are reserved for the printed wiring board (PWB) number

assigned to the optional first IndustryPack a.

16. Eight bytes are reserved for the board identifier, in ASCII format, assigned

to the optional second IndustryPack b.

17. Eight bytes are reserved for the serial number, in ASCII format, assigned

to the optional second IndustryPack b.

18. Eight bytes are reserved for the printed wiring board (PWB) number

assigned to the optional second IndustryPack b.

19. Eight bytes are reserved for the board identifier, in ASCII format, assigned

to the optional third IndustryPack c.

20. Eight bytes are reserved for the serial number, in ASCII format, assigned

to the optional third IndustryPack c.

21. Eight bytes are reserved for the printed wiring board (PWB) number

assigned to the optional third IndustryPack c.

22. Eight bytes are reserved for the board identifier, in ASCII format, assigned

to the optional fourth IndustryPack d.

23. Eight bytes are reserved for the serial number, in ASCII format, assigned

to the optional fourth IndustryPack d.

24. Eight bytes are reserved for the printed wiring board (PWB) number

assigned to the optional fourth IndustryPack d.

25. Growth space (65 bytes) is reserved. This pads the structure to an even 256

bytes.