DEIF FAS-113DG同步控制器  PDF资料

1.产 品 资 料 介 绍：

中文资料：

DEIF FAS-113DG 同步控制器 是由 DEIF（丹麦电力工业电子公司）生产的一款高性能同步控制器，主要用于同步发电机组与电网或其他发电机组的并联运行。该设备适用于多个发电机组并联运行的场景，尤其是在需要精确控制电力系统稳定性、并网及并机过程中的电流、频率和电压等参数的应用中。

主要特点与功能：

1. 精确同步控制：

• DEIF FAS-113DG 具有精确的同步控制功能，可以确保多个发电机组或发电机与电网的电压、频率和相位完全同步，从而避免并网过程中的电力冲击和系统故障。

2. 频率与电压监控：

• 控制器能够持续监测发电机和电网的频率及电压。当发电机的输出电压与电网电压或其他发电机组的电压差异过大时，控制器会启动保护机制，防止并网事故。

3. 并网与分网功能：

• FAS-113DG 支持自动并网和分网功能，能够在不需要人工干预的情况下，自动检测电网的条件，并控制发电机组与电网的平稳连接或断开。

4. 自动调节功率因数：

• 控制器能够自动调节功率因数，以确保发电机组输出的电能高效并稳定地传送到电网。这样不仅提高了能源使用效率，还降低了由于功率不平衡带来的系统负荷。

5. 并联发电机组协调：

• 在多个发电机组并联运行的场景中，FAS-113DG 可以协调各个发电机组的输出负载，确保负载分配合理且平衡，有效避免因负载不均导致的设备损耗和故障。

6. 多种保护功能：

• 该控制器具备多种保护功能，如频率过高、频率过低、电压过高、电压过低等保护措施，可以在发电机组运行不正常时自动切断连接，保护发电机和电网的安全。
• 另外，它还具有短路保护、过载保护和过温保护等功能。

7. 用户友好的界面：

• FAS-113DG 配备有直观的显示界面，方便用户进行操作、监控和设置。控制器的显示屏可以显示当前的电压、频率、功率等关键参数，并且可以通过触摸屏或按钮进行调节和配置。

8. 支持远程监控与操作：

• 该同步控制器支持通过 Modbus RTU、Ethernet、CAN 等通信协议进行远程监控和操作。用户可以通过远程设备监控多个发电机组的状态，进行配置或故障排查。

9. 高可靠性与抗干扰性：

• 作为工业级产品，FAS-113DG 具有极高的可靠性和抗干扰能力，适应恶劣的工业环境，能够在极端的温度、湿度、电磁干扰等条件下稳定运行。

10. 广泛的应用场景：

• 该同步控制器广泛应用于多个发电机组并网、微电网、船舶电力系统、油气平台以及工业厂区电力系统等领域。尤其在需要高精度控制和高可靠性要求的场合，FAS-113DG 是非常理想的选择。

技术规格（典型）：

• 输入电压：通常为 24V DC 或 110V AC/220V AC（依据安装需求）
• 控制模式：同步控制，支持并网与分网
• 通讯接口：
• 支持 Modbus RTU、Ethernet、CAN 等协议
• 支持 远程监控与调控
• 频率调节范围：根据具体应用，支持微调频率范围
• 电压调节范围：支持输出电压的微调，以确保与电网电压匹配
• 保护功能：
• 过载、短路、过压、欠压保护
• 频率过高、频率过低保护
• 短期电流保护
• 显示与操作界面：
• LCD显示屏，用于显示电压、频率、功率等参数
• 可通过按钮或触摸屏进行操作和配置
• 工作环境温度：-20°C 至 +60°C
• 安装方式：可嵌入式或挂壁式安装，适合工业控制柜
• 尺寸：紧凑型设计，适合标准控制面板或机架安装

英文资料：

The DEIF FAS-113DG synchronous controller is a high-performance synchronous controller produced by DEIF (Danish Electric Power Industry Electronics Company), mainly used for parallel operation of synchronous generator sets with the grid or other generator sets. This device is suitable for scenarios where multiple generator sets operate in parallel, especially in applications that require precise control of power system stability, current, frequency, and voltage parameters during grid connection and parallel operation.

Main features and functions:

Precise synchronization control:

DEIF FAS-113DG has precise synchronization control function, which can ensure that multiple generator sets or generators are completely synchronized with the voltage, frequency, and phase of the grid, thereby avoiding power shocks and system failures during grid connection.

Frequency and voltage monitoring:

The controller can continuously monitor the frequency and voltage of the generator and the power grid. When the output voltage of the generator differs significantly from the grid voltage or the voltage of other generator units, the controller will activate a protection mechanism to prevent grid connection accidents.

Grid connection and distribution functions:

FAS-113DG supports automatic grid connection and disconnection functions, which can automatically detect the conditions of the power grid without manual intervention and control the smooth connection or disconnection of the generator set and the power grid.

Automatic adjustment of power factor:

The controller can automatically adjust the power factor to ensure that the electrical energy output by the generator set is efficiently and stably transmitted to the grid. This not only improves energy efficiency, but also reduces the system load caused by power imbalance.

Coordination of parallel generator sets:

In the scenario of multiple generator sets operating in parallel, FAS-113DG can coordinate the output loads of each generator set, ensure reasonable and balanced load distribution, and effectively avoid equipment losses and failures caused by uneven loads.

Multiple protection functions:

This controller has multiple protection functions, such as protection measures for high frequency, low frequency, high voltage, low voltage, etc. It can automatically cut off the connection when the generator set is not running normally, protecting the safety of the generator and the power grid.

In addition, it also has functions such as short circuit protection, overload protection, and over temperature protection.

User friendly interface:

FAS-113DG is equipped with an intuitive display interface, making it convenient for users to operate, monitor, and set up. The display screen of the controller can display key parameters such as current voltage, frequency, power, etc., and can be adjusted and configured through touch screen or buttons.

Support remote monitoring and operation:

This synchronous controller supports remote monitoring and operation through communication protocols such as Modbus RTU, Ethernet, CAN, etc. Users can monitor the status of multiple generator sets through remote devices for configuration or troubleshooting.

High reliability and anti-interference:

As an industrial grade product, FAS-113DG has extremely high reliability and anti-interference ability, adapts to harsh industrial environments, and can operate stably under extreme conditions such as temperature, humidity, and electromagnetic interference.

Wide range of application scenarios:

This synchronous controller is widely used in the fields of multiple generator sets connected to the grid, microgrids, ship power systems, oil and gas platforms, and industrial plant power systems. Especially in situations where high-precision control and high reliability are required, FAS-113DG is an ideal choice.

Technical specifications (typical):

Input voltage: typically 24V DC or 110V AC/220V AC (depending on installation requirements)

Control mode: synchronous control, supporting grid connection and distribution

Communication interface:

Supports protocols such as Modbus RTU, Ethernet, CAN, etc

Support remote monitoring and control

Frequency adjustment range: Depending on the specific application, it supports fine-tuning the frequency range

Voltage regulation range: supports fine adjustment of output voltage to ensure matching with grid voltage

Protection function:

Overload, short circuit, overvoltage, undervoltage protection

High frequency and low frequency protection

Short term current protection

Display and operation interface:

LCD display screen, used to display parameters such as voltage, frequency, power, etc

Can be operated and configured through buttons or touch screen

Working environment temperature: -20 ° C to+60 ° C

Installation method: Can be embedded or wall mounted, suitable for industrial control cabinets

Size: Compact design, suitable for standard control panel or rack installation

2.产      品      展      示      

本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs