ABB SB522K01 3BSE016019R1电池单元
1.产 品 资 料 介 绍:
中文资料:
ABB SB522K01 3BSE016019R1内存保护开关启用或禁用与运行/停止开关相关的内存保护功能。选项:已启用:内存保护已启用,可防止写入程序内存和配置以及强制或覆盖离散数据。ABB SB522K01 3BSE016019R1已禁用:内存保护已禁用。默认设置:禁用。
ABB SB522K01 3BSE016019R1加电模式选择加电后立即生效的CPU模式。选择:最后、停止、运行。默认值:Last(上次断电时的模式)。注意:如果ABB SB522K01 3BSE016019R1电池或能量包丢失或出现故障,并且逻辑/配置加电源设置为始终RAM,则无论加电模式参数设置如何,CPU都会在STOP模式下加电。
ABB SB522K01 3BSE016019R1地址空间映射类型指定用于Modbus TCP/IP客户端和PACSystems控制器之间数据传输的内存映射类型。选项:禁用:禁用设置用于包含不支持Modbus TCP的以太网固件的系统。ABB SB522K01 3BSE016019R1
英文资料:
ABB SB522K01 3BSE016019R1 Memory Protection Switch Enables or disables the Memory Protect feature associated with the RUN/STOP Switch. Choices: Enabled: Memory Protect is enabled, which prevents writing to program memory and configuration and forcing or overriding discrete data. Disabled: Memory Protect is disabled. Default: Disabled.ABB SB522K01 3BSE016019R1
ABB SB522K01 3BSE016019R1 Power-up Mode Selects the CPU mode to be in effect immediately after power-up. Choices: Last, Stop, Run. Default: Last (the mode it was in when it last powered down). Note: If the battery or Energy Pack is missing or has failed and if Logic/ Configuration Power-up Source is set to Always RAM, the CPU powers up in STOP Mode regardless of the setting of the Power-up Mode parameter.ABB SB522K01 3BSE016019R1
ABB SB522K01 3BSE016019R1 Address Space Mapping Type Specifies the type of memory mapping to be used for data transfer between Modbus TCP/IP clients and the PACSystems controller. Choices: Disabled: The Disabled setting is intended for use in systems containing Ethernet firmware that does not support Modbus TCP.
2.产 品 展 示
3.主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网,转载请附上此链接:http://www.jiangxidcs.com