网关做为PROFINET网络的Device设备（即从站），带2个RJ45以太网接口，支持100BASE-TX，
MDI/MDIX自检测，集成以太网交换机，可以组成链式网络，支持环网冗余。
2) 适应PROFINET V2.31协议，采用实时（RT）通讯功能，符合： GB/T 25105-2014《工业通信
网络现场总线规范类型10: PROFINET IO规范》，IEC 61158-5-10：2007，IDT。
3) PROFINET 输入/输出数量可自由设定，支持的数据长度：
输入≤500 字节，输出≤500 字节，输入+输出≤1000 字节。
4) KJ-PNG-006作为MODBUS -TCP主站（客户端），支持01H、02H、03H、04H、05H、06H、0FH、
10H号功能；
5) KJ-PNG-006 作为MODBUS -TCP从站（服务器），支持02H、04H、0FH、10H号功能；
6) 电源电压：24VDC(±5％)，最大功率3.5W
7) 环境温度：
运输和存储：-40℃～+70℃
工作温度：-20℃～+55℃
8) 工作相对湿度：5~95%
9) 外形尺寸：60mm（宽）×110mm（高）×80mm（厚）；
10) 安装方式：35mm导轨；
11) 防护等级：IP20；
12) 重量：约250www.gongkong.com 2022/7/11 9:38
无锡耐特森MODBUS TCP转PROFINET网关产品亮点：1、配置方便，用户不必了解PROFINET IO和MODBUS TCP技术细节，无需任何编程就可以完成对网关的配置；2、数据吞吐量大，1440字节输入数据+1440字节输出数据；3、2通道独立MODBUS TCP接口完全隔离，可设置成不同参数，连接各种设备；3、双路PROFINET接口，具有交换机功能，现场连接更加方便直接。4、调试方便：提供调试配置软件，支持双向数据监视、支持命令状态监视等；无锡耐特森MODBUS TCP转PROFINET网关通用技术指标：1、电源电压：DC24V（±5%）2、外形尺寸：（宽）40mm（高）110mm（厚）75mm3、安装方式：35mm导轨4、防护等级：IP205、工作温度：-20℃~+55℃，工作相对湿度： 95%（无结露）6、运输温度：-30℃~+70℃
订货号MCN-PN3011,该MODBUS TCP转PROFINET网关是网口转PROFINET网关的一种，具备大数据量通讯能力1440字节输入数据+1440字节输出数据。网关在PROFINET一侧是PROFINET IO 从站，在网口一侧支持MODBUS TCP主站或从站协议。该MODBUS TCP转PROFINET网关MODBUS TCP一侧做客户端时可用连接多个服务器，形成MODBUS TCP子网并连接到PROFINET，实现PROFINET控制器监控MODBUS TCP设备的技术要求。网关MODBUS TCP一侧做服务器时可用于将其他MODBUS TCP主站（如PLC/DCS）以及它的从站数据传输到PROFINET控制器。该MODBUS TCP转PROFINET网关技术原理为存储器共享型，不需要主站PLC/DCS的编程，只需在配置软件中对网关进行配置，即可实现MODBUS TCP转PROFINET网关的功能需求。
As a device device (i.e. slave station) of PROFINET network, the gateway has two RJ45 Ethernet interfaces and supports 100base-tx,
Mdi/mdix self-test, integrated Ethernet switch, can form a chain network, and support ring network redundancy.
2) Adapt to PROFINET v2.31 protocol, adopt real-time (RT) communication function, and comply with gb/t 25105-2014 industrial communication
Network fieldbus specification type 10: PROFINET IO specification, IEC 61158-5-10:2007, IDT.
3) PROFINET input / output quantity can be set freely, and the supported data length is:
nput ≤ 500 bytes, output ≤ 500 bytes, input + output ≤ 1000 bytes.
4) Kj-png-006, as the Modbus -tcp master (client), supports 01h, 02h, 03h, 04H, 05H, 06h, 0Fh10h function;
5) Kj-png-006, as a Modbus -tcp slave (server), supports 02h, 04H, 0Fh, 10h functions;
6) Power supply voltage: 24VDC (± 5%), maximum power 3.5W
7) Ambient temperature:
Transportation and storage: -40 ℃ ~ +70 ℃
Working temperature: -20 ℃ ~ +55 ℃
8) Working relative humidity: 5~95%
9) Overall dimension: 60mm (width) × 110mm (high) × 80mm thick;
10) Installation method: 35mm guide rail;
11) Protection grade: IP20;
12) Weight: about 250www.gongkong.com com 2022/7/11 9:38
Wuxi nexen Modbus TCP to PROFINET gateway product highlights: 1. Convenient configuration, users do not need to understand the technical details of PROFINET IO and Modbus TCP, and can complete the configuration of the gateway without any programming; 2. Large data throughput, 1440 bytes of input data + 1440 bytes of output data; 3. The 2-channel independent Modbus TCP interface is completely isolated and can be set to different parameters to connect various devices; 3. Dual PROFINET interface, with switch function, makes field connection more convenient and direct. 4. Convenient debugging: provide debugging configuration software, support bidirectional data monitoring, support command status monitoring, etc; General technical indicators of Wuxi nexen Modbus TCP to PROFINET gateway: 1. Power supply voltage: DC24V (± 5%) 2. Overall dimension: (width) 40mm (height) 110mm (thickness) 75mm3, installation method: 35mm guide rail 4. Protection grade: ip205, working temperature: -20 ℃ ~+55 ℃, working relative humidity: 95% (no condensation) 6. Transportation temperature: -30 ℃ ~+70 ℃
The order number is mcn-pn3011. The Modbus TCP to PROFINET gateway is a kind of network port to PROFINET gateway, which has the ability of large amount of data communication. 1440 bytes of input data +1440 bytes of output data. The gateway is a PROFINET IO slave on the PROFINET side, and supports Modbus TCP master or slave protocol on the network port side. When the Modbus TCP side of this Modbus TCP to PROFINET gateway is used as the client, multiple servers can be connected to form a Modbus TCP subnet and connect to PROFINET to realize the technical requirements of PROFINET controller to monitor Modbus TCP equipment. When the Modbus TCP side of the gateway is used as a server, it can be used to transmit the data of other Modbus TCP master stations (such as plc/dcs) and its slave stations to the PROFINET controller. The technical principle of the Modbus TCP to PROFINET gateway is memory sharing, which does not need the programming of the master station plc/dcs, and only needs to configure the gateway in the configuration software to realize the functional requirements of the Modbus TCP to PROFINET gateway.
