NI PXI-2798高性能多路开关模块
1.产 品 资 料 介 绍：
中文资料：
NI PXI-2798是一种高性能多路开关模块，可用于NI PXI平台上的测试和测量应用。以下是有关PXI-2798的配置说明、功能和应用领域的概述：
配置说明：
- PXI-2798采用PXI总线连接，并插入PXI机箱中的一个插槽。
- 它具有多个独立的开关通道，可以配置为不同的连接方式。
- 每个开关通道都带有两个输入和一个输出端口，可以用于连接测试设备或测量仪器。
功能和作用：
信号路由：PXI-2798允许根据需要在不同设备之间切换信号路径。这对于测试和测量系统中的信号切换和路由非常有用。它可以帮助简化测试配置，提高系统灵活性。
信号切换：它可以在测试过程中切换不同的输入和输出信号，以便对被测设备或电路进行多种测试方案。通过改变开关通道的配置，可以快速切换不同的测量信号。
通道扩展：PXI-2798可以用作通道扩展模块，允许将多个测试设备或传感器连接到单个测试系统。这样可以简化系统架构，并减少所需的硬件组件数量。
应用领域：
自动测试设备（ATE）：PXI-2798常用于自动测试设备中，用于连接被测设备和测试仪器之间的信号通路切换。它可以帮助提高测试效率和自动化程度。
仪器控制和测量：在实验室和研发环境中，PXI-2798可用于仪器控制和信号路由。它可以方便地切换不同的测试信号源和测量仪器，以支持各种测量和分析需求。
数据采集和监控系统：对于需要监控和采集多个信号源或传感器的应用，PXI-2798可用于切换和路由不同的信号通路，以便进行数据采集、监控和分析。
英文资料：
NI PXI-2798 is a high-performance multi-channel switch module that can be used for testing and measurement applications on the NI PXI platform. The following is an overview of the configuration instructions, functions, and application areas of PXI-2798:
Configuration instructions:
PXI-2798 uses a PXI bus connection and is inserted into a slot in the PXI chassis.
It has multiple independent switch channels and can be configured for different connection modes.
Each switch channel has two input and one output port, which can be used to connect testing equipment or measuring instruments.
Function and function:
Signal routing: PXI-2798 allows switching signal paths between different devices as needed. This is very useful for signal switching and routing in testing and measuring systems. It can help simplify testing configurations and improve system flexibility.
Signal switching: It can switch different input and output signals during the testing process, in order to carry out multiple testing schemes on the tested equipment or circuit. By changing the configuration of the switch channel, different measurement signals can be quickly switched.
Channel Expansion: PXI-2798 can be used as a channel expansion module, allowing multiple testing devices or sensors to be connected to a single testing system. This can simplify the system architecture and reduce the number of required hardware components.
Application field:
Automatic Test Equipment (ATE): PXI-2798 is commonly used in automatic test equipment to switch signal paths between the tested equipment and the testing instrument. It can help improve testing efficiency and automation.
Instrument control and measurement: PXI-2798 can be used for instrument control and signal routing in laboratories and research and development environments. It can easily switch between different test signal sources and measuring instruments to support various measurement and analysis needs.
Data acquisition and monitoring system: For applications that require monitoring and collecting multiple signal sources or sensors, PXI-2798 can be used to switch and route different signal paths for data acquisition, monitoring, and analysis.
2.产 品 展 示
3.主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
