NI PXI-6289高性能的数据采集卡
1.产 品 资 料 介 绍：
中文资料：
NI PXI-6289是一款高性能的数据采集卡，具有以下产品特点：
多通道数据采集：NI PXI-6289具有16个模拟输入通道，可以同时采集多个信号源的数据。这使得它非常适合于需要同时监测多个信号或多通道数据采集的应用。
高速采样率：该采集卡支持高达1.25 MS/s的采样率，可以以高速采集数据，适用于需要高时间分辨率的应用，如快速信号捕获和高速数据采集。
高分辨率和精度：NI PXI-6289具有16位模数转换器（ADC），提供高精度的模拟信号采集和测量。它能够提供准确的测量结果，适用于需要高分辨率的应用。
多种测量功能：该采集卡支持多种测量功能，包括电压测量、电流测量、频率测量、电阻测量等。这使得它适用于各种数据采集和测量应用。
灵活的连接接口：NI PXI-6289通过接口板与主机计算机连接，采用PXI总线标准，确保高速数据传输和稳定性。它还提供了各种连接接口，如BNC接口和插头接口，便于连接各种外部信号源。
使用方法：
- 确保将NI PXI-6289插入PXI机箱中，并将机箱与主机计算机连接。
- 在计算机上安装NI-DAQmx驱动软件，并根据需要进行配置和设置。
- 使用NI-DAQmx编程库或NI Measurement & Automation Explorer（NI MAX）软件，编写程序或配置采集参数。
- 运行程序或配置文件，开始进行数据采集。
参数详情：
- 模拟输入通道数：16
- 模数转换器（ADC）位数：16位
- 最大采样率：1.25 MS/s
- 输入电压范围：±10 V
- 输入阻抗：1 MΩ || 20 pF
- 数字输入/输出通道数：8
- 数字输入/输出电平：TTL/CMOS
- 外部触发输入通道数：2
- 接口：PXI总线
- 连接接口：BNC接口、插头接口等
英文资料：
NI PXI-6289 is a high-performance data acquisition card with the following product features:
Multi channel data acquisition: NI PXI-6289 has 16 analog input channels, which can simultaneously collect data from multiple signal sources. This makes it very suitable for applications that require simultaneous monitoring of multiple signals or multi-channel data acquisition.
High speed sampling rate: This acquisition card supports a sampling rate of up to 1.25 MS/s and can collect data at high speed, suitable for applications that require high time resolution, such as fast signal acquisition and high-speed data acquisition.
High resolution and accuracy: NI PXI-6289 features a 16 bit analog-to-digital converter (ADC), providing high-precision analog signal acquisition and measurement. It can provide accurate measurement results and is suitable for applications that require high resolution.
Multiple measurement functions: This acquisition card supports multiple measurement functions, including voltage measurement, current measurement, frequency measurement, resistance measurement, etc. This makes it suitable for various data collection and measurement applications.
Flexible connection interface: NI PXI-6289 is connected to the host computer through an interface board, using PXI bus standards to ensure high-speed data transmission and stability. It also provides various connection interfaces, such as BNC interface and plug interface, to facilitate the connection of various external signal sources.
usage method:
Ensure that the NI PXI-6289 is inserted into the PXI chassis and connected to the host computer.
Install the NI-DAQmx driver software on the computer and configure and set it as needed.
Use the NI-DAQmx programming library or NI Measurement&Automation Explorer (NI MAX) software to write programs or configure collection parameters.
Run the program or configuration file to start data collection.
Parameter details:
Number of analog input channels: 16
Analog to Digital Converter (ADC) bits: 16
Maximum sampling rate: 1.25 MS/s
Input voltage range: ± 10 V
Input impedance: 1 M Ω | | 20 pF
Number of digital input/output channels: 8
Digital input/output level: TTL/CMOS
Number of external trigger input channels: 2
Interface: PXI bus
Connection interface: BNC interface, plug interface, etc
2.产 品 展 示
3.主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
