REXROTH CDB01.1C-ET-EN1-EN1-NNN-NNN-L2-S-NN-FW驱动控制器
1.产 品 资 料 介 绍：
中文资料：
CDB01.1C -ET-EN1-EN1-NNN-NNN-L2-S-NN-FW由Rexroth Indramat 公司生产。它是一个控制部分，安装在驱动控制器的功率部分中。驱动控制器用于工业机器人、机床、印刷机和食品加工机等应用。该类型使用DC 24V电压供电，最大脉冲宽度为110 ms，浪涌电流为4.5 A，DC 24V时功耗为8 W。为了实现精确连接，它配备了多种附件，例如光纤电缆连接、信号电平转换器和用于编码器仿真的信号电平转换器。
CDB01.1C -ET-EN1-EN1-NNN-NNN-L2-S-NN-FW应在以下环境条件下运行，其中包括海拔高度1000 米、允许湿度 95% 和 25g/m3绝对湿度。该部分可单独交付，应由Rexroth Indramat培训的人员安装和拆卸。确保安装和拆卸不超过 20 次，因为这会增加损坏的风险。它是一个双轴控制部分，具有可配置选项，配备一个配置插槽安全技术，并具有 7-11 个数字输入。CDB01.1C-ET-EN1-EN1-NNN-NNN-L2-S-NN-FW的开关频率范围为 2 kHz 和 4 kHz 到 16 kHz。
此控制部分编码器 HSF/RSF 选项、MultiEthernet 主站通信、标准控制部分和安全扭矩 OFF 安全选项。控制面板不适合热插拔，应在驱动控制器投入运行时插入。它允许您设置驱动器地址、建立位置数据参考和设置模拟输出。CDB01.1C -ET-EN1-EN1-NNN-NNN-L2-S-NN-FW应具有充足的气流以实现最佳冷却效果。
英文资料：
CDB01.1C - ET-EN1-EN1-NNNN-L2-S-NN-FW is produced by Rexroth Indramat. It is a control section installed in the power section of the drive controller. Drive controllers are used in applications such as industrial robots, machine tools, printing machines, and food processing machines. This type uses a DC 24V voltage supply, with a maximum pulse width of 110 ms, a surge current of 4.5 A, and a power consumption of 8 W at DC 24V. To achieve precise connection, it is equipped with various accessories, such as fiber optic cable connections, signal level converters, and signal level converters for encoder simulation.
CDB01.1C - ET-EN1-EN1-NNNN-L2-S-NN-FW should operate under the following environmental conditions, including an altitude of 1000 meters, allowable humidity of 95%, and absolute humidity of 25g/m3. This part can be delivered separately and should be installed and disassembled by personnel trained by Rexroth Indramat. Ensure that installation and disassembly do not exceed 20 times, as this increases the risk of damage. It is a dual axis control section with configurable options, equipped with a configuration slot security technology, and has 7-11 digital inputs. The switching frequency range of CDB01.1C-ET-EN1-EN1-NNNN-NNN-L2-S-NN-FW is 2 kHz and 4 kHz to 16 kHz.
This control section includes encoder HSF/RSF option, MultiEthernet master station communication, standard control section, and safety torque OFF safety option. The control panel is not suitable for hot swapping and should be inserted when the drive controller is put into operation. It allows you to set drive addresses, establish location data references, and set analog outputs. CDB01.1C - ET-EN1-EN1-NNNN-L2-S-NN-FW should have sufficient airflow to achieve optimal cooling effect.
2.产 品 展 示
3.主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
