REXROTH CDB01.1C-ET-EN1-EN1-NNN-MEM-L2-S-NN-FW运动控制设备
1.产 品 资 料 介 绍：
中文资料：
CDB01.1C -ET-EN1-EN1-NNN-MEM-L2-S-NN-FW型号是Rexroth Indramat开发的现代运动控制设备之一。该型号是 CBD 系列驱动控制单元的控制部分。该模型采用了最新的安全技术。CBD01.1控制部分广泛应用于包装机械、食品加工机械、纺织机械等工业自动化领域。该模块作为单独的组件在全球范围内发货，固件必须单独订购。控制部分附带一年产品更换保修，可在出现任何故障时提出索赔。驱动控制器提供广泛的固件功能，包括符合 IEC 标准的运动逻辑。确保由经过培训的人员安装和配置控制单元。为了保护CDB01.1 控制部分免受保留极性和错误连接的影响，请使用保护二极管。由于其可靠性和经济性，控制单元在力士乐驱动系统中发挥着重要作用。
CDB01.1C-ET-EN1-EN1-NNN-MEM-L2-S-NN-FW型号应防止灰尘和污垢。将设备安装在控制柜中，以将环境温度保持在 0 至 +40 摄氏度的范围内。相对湿度不得超过规定的限值。该模块设计为通过环境空气进行冷却。该产品（CDB01.1C-ET-EN1-EN1-NNN-MEM-L2-S-NN-FW）的物理尺寸为 49.5mm x 103mm x 241mm。该模型允许 PWM 频率从 2 kHz 切换到 16 kHz，增量为 2 kHz。控制部分具有安全扭矩关闭功能，可防止意外或突然停止引起的搅动
英文资料：
The CDB01.1C - ET-EN1-EN1-NNNN-MEM-L2-S-NN-FW model is one of the modern motion control devices developed by Rexroth Indramat. This model is the control part of the CBD series drive control unit. This model adopts the latest security technologies. The control part of CBD01.1 is widely used in industrial automation fields such as packaging machinery, food processing machinery, textile machinery, etc. This module is shipped as a separate component worldwide, and firmware must be ordered separately. The control part comes with a one-year product replacement warranty, which allows for claims in the event of any malfunction. The drive controller provides a wide range of firmware functions, including motion logic that complies with IEC standards. Ensure that the control unit is installed and configured by trained personnel. To protect the control section of CDB01.1 from the effects of retained polarity and incorrect connections, please use protective diodes. Due to its reliability and economy, the control unit plays an important role in the Rexroth drive system.
The CDB01.1C-ET-EN1-EN1-NNNN-MEM-L2-S-NN-FW model should be protected from dust and dirt. Install the equipment in the control cabinet to maintain the ambient temperature within the range of 0 to+40 degrees Celsius. The relative humidity shall not exceed the specified limit. This module is designed for cooling through ambient air. The physical dimensions of this product (CDB01.1C-ET-EN1-EN1-NNNN-MEM-L2-S-NN-FW) are 49.5mm x 103mm x 241mm. This model allows the PWM frequency to switch from 2 kHz to 16 kHz in increments of 2 kHz. The control part has a safety torque shut-off function to prevent agitation caused by accidents or sudden stops
2.产 品 展 示
3.主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
