ABB 6018BZ10200C模拟量输入控制器
1.产 品 资 料 介 绍：
中文资料：
当ABB 6018BZ10200C系统安装在欧洲指定的1级2区区域时，ABB 6018BZ10200C符合ATEX指令要求的外壳具有更高的防护等级。有关规范，请参阅附录A中的“ATEX 1级2区危险场所要求”。ABB 6018BZ10200C
ABB 6018BZ10200CABB 6018BZ10200C外壳必须能够充分散发安装在内部的所有组件产生的热量，以免组件过热。散热也是决定是否需要风扇和空调等外壳冷却选项的一个因素。ABB 6018BZ10200C
RX3i背板的所有侧面都需要至少102毫米（4英寸）的最小空间进行冷却。ABB 6018BZ10200C根据设备在运行过程中产生的热量，可能需要额外的空间。附录C说明了如何计算机柜中RX3i模块和现场设备的散热。
英文资料：
When a ABB 6018BZ10200C system is installed into an area designated as Class 1 Zone 2 in Europe, compliance with the ATEX Directive requires an enclosure with a higher degree of protection. Refer to “ATEX Class 1 Zone 2 Hazardous Location Requirements” located in Appendix A for specifications.
ABB 6018BZ10200CThe enclosure must be able to adequately dissipate the heat generated by all of the components mounted inside so that no components overheat. Heat dissipation is also a factor in determining the need for enclosure cooling options such as fans and air conditioning.ABB 6018BZ10200C
A minimum space of at least 102mm (4 inches) is required on all sides of the ABB 6018BZ10200C backplane for cooling. Additional space may be required, depending on the amount of heat generated by the equipment during operation. Appendix C explains how to calculate heat dissipation for RX3i modules and field devices in an enclosure.
2.产 品 展 示
3.主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
