ABB TZID-C智能型电子式定位器
1.产 品 资 料 介 绍：
中文资料：
ABB TZID-C是一款智能型电子式定位器，用于控制和监控工业过程中的控制阀门和执行器。ABB TZID-C的配置说明和功能作用如下：
ABB TZID-C配置说明：
- 接口：ABB TZID-C提供了各种接口，包括4-20 mA, HART, Profibus DP, Foundation Fieldbus和Modbus等。
- 参数：ABB TZID-C可以配置各种参数，包括闭合时间、开启时间、工作方式、阈值、传感器类型等。
- 诊断：ABB TZID-C可以进行自诊断和报警，并提供故障代码和状态报告。
ABB TZID-C功能作用：
- 定位：ABB TZID-C可以根据输入信号的变化来控制执行器的位置，并精确地控制阀门的开关。
- 监测：ABB TZID-C可以监测执行器和阀门的状态，并提供实时的反馈信号。
- 诊断：ABB TZID-C可以诊断执行器和阀门的故障，并提供详细的故障报告和状态报告。
ABB TZID-C应用领域：
ABB TZID-C广泛应用于各种工业领域，包括石油、化工、电力、水处理等。具体应用场景如下：
- 石油：用于控制管道、阀门、泵等设备的位置和状态。
- 化工：用于控制反应釜、加热器、混合器等设备的位置和状态。
- 电力：用于控制锅炉、发电机、变压器等设备的位置和状态。
- 水处理：用于控制水处理设备，如水泵、过滤器、净化器等的位置和状态。
英文资料：
ABB TZID-C is an intelligent electronic positioner used to control and monitor control valves and actuators in industrial processes. The configuration description and functional functions of ABB TZID-C are as follows:
ABB TZID-C configuration instructions:
Interface: ABB TZID-C provides various interfaces, including 4-20 mA, HART, Profibus DP, Foundation Fieldbus, and Modbus.
Parameters: ABB TZID-C can configure various parameters, including closing time, opening time, working mode, threshold, sensor type, etc.
Diagnosis: ABB TZID-C can perform self diagnosis and alarm, and provide fault codes and status reports.
ABB TZID-C Function:
Positioning: ABB TZID-C can control the position of the actuator based on changes in input signals and accurately control the opening and closing of the valve.
Monitoring: ABB TZID-C can monitor the status of actuators and valves and provide real-time feedback signals.
Diagnosis: ABB TZID-C can diagnose actuator and valve faults and provide detailed fault and status reports.
ABB TZID-C application areas:
ABB TZID-C is widely used in various industrial fields, including petroleum, chemical, power, water treatment, etc. The specific application scenarios are as follows:
Petroleum: Used to control the position and status of equipment such as pipelines, valves, and pumps.
Chemical engineering: used to control the position and status of equipment such as reactors, heaters, and mixers.
Electricity: Used to control the position and status of equipment such as boilers, generators, transformers, etc.
Water treatment: Used to control the position and status of water treatment equipment, such as pumps, filters, purifiers, etc.
2.产 品 展 示
3.主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
