ALSTOM N897164610L输入输出模块
1.产 品 资 料 介 绍：
中文资料：
ALSTOM N897164610L重新启动至固件更新操作当按下以太网重新启动按钮并保持10秒以上时，以太网接口将重新启动至硬件更新操作。这通常在故障排除期间进行，以绕过可能无效的固件，ALSTOM N897164610L并允许使用WinLoader加载有效的固件。在固件更新真正开始之前，您可以手动退出固件更新，ALSTOM N897164610L并通过再次按下以太网重新启动按钮重新启动现有固件。电池支持RAM。54注意：每当任何参考存储器的大小发生变化时，相应参考存储器的内容都会自动清除。55有关内存类型及其管理方式的讨论，请参阅ALSTOM N897164610L编程器参考手册，GFK-2950第3章。56本出版物发布时不支持。高级用户参数（AUP）功能已纳入PME硬件配置（HWC）中，自PME 8.60 SIM5版本起生效。58 RSTi EP CPE100在发布时不支持SNTP。ALSTOM N897164610L
英文资料：
ALSTOM N897164610LRestart into Firmware Update Operation When the Ethernet Restart pushbutton is pressed and held for more than 10 seconds, the Ethernet interface will restart into firmware update operation.ALSTOM N897164610L This is typically done during troubleshooting to bypass possibly invalid firmware and allow valid firmware to be loaded using WinLoader. Until the firmware update actually begins, you can manually exit the firmware update and restart with the existing firmware by pressing the Ethernet Restart pushbutton again.Battery-backed RAM. 54 Note: Whenever the size of any reference memory is changed, the content of the corresponding reference memory is automatically cleared. 55 For discussion of memory types and how they are managed, refer to ALSTOM N897164610LProgrammer’s Reference Manual, GFK-2950 Chapter 3. 56 Not supported at the time of this publication.The Advanced User Parameters (AUP) feature has been incorporated into PME Hardware Configuration (HWC) effective with PME release 8.60 SIM5. 58 RSTi-EP CPE100 does not support SNTP at the time of publication.ALSTOM N897164610L
2.产 品 展 示
3.主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
