WOODWARD 9907-007调速器
1.产 品 资 料 介 绍：
WOODWARD 9907-007调速器，用于控制和监测发电机组和其它工业应用中的电力系统。其主要功能包括：
- 发电机电压和电流的监测和控制。
- WOODWARD 9907-007调节发电机的输出电压和频率。
- WOODWARD 9907-007控制发电机的起动和停止。
- 保护发电机免受电流过载、电压过高/低、频率过高/低、短路等异常情况的损害。
- 与其它系统进行通信，如PLC、DCS、SCADA等。
WOODWARD 9907-007配置说明：
- 输入：输入电压为24 VDC ± 15%。
- 输出：最大输出为2A 30VDC，可以驱动外部继电器。
- 通信：支持RS485和MODBUS协议。
- 显示：带有4位数字显示器，可以显示各种参数和状态。
- 编程：可通过Woodward的工具软件进行编程和设置。
WOODWARD 9907-007适用于各种工业领域，如电力、石油、天然气、化工、水利、制药等。它广泛应用于发电机组、变电站、输电线路、电容器组等电力系统中，能够提供可靠的电力保护和控制功能。
WOODWARD 9907-007 governors are used to control and monitor power systems in generator sets and other industrial applications. Its main functions include:
Monitoring and control of generator voltage and current.
WOODWARD 9907-007 regulates the output voltage and frequency of the generator.
WOODWARD 9907-007 controls the starting and stopping of the generator.
Protect the generator from abnormal conditions such as current overload, high/low voltage, high/low frequency, short circuit, etc.
Communicate with other systems, such as PLC, DCS, SCADA, etc.
WOODWARD 9907-007 Configuration Instructions:
Input: The input voltage is 24 VDC ± 15%.
Output: The maximum output is 2A 30VDC, which can drive external relays.
Communication: Supports RS485 and MODBUS protocols.
Display: With a 4-digit digital display, it can display various parameters and status.
Programming: It can be programmed and set through Woodward's tool software.
WOODWARD 9907-007 is suitable for various industrial fields, such as electric power, oil, natural gas, chemical engineering, water conservancy, pharmaceuticals, etc. It is widely used in power systems such as generator sets, substations, transmission lines, capacitor banks, and can provide reliable power protection and control functions.
2.产 品 展 示
3.主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
