GE VMEMB-Z004通用电气模块卡件
1.产 品 资 料 介 绍：
GE VMEMB-Z004通用电气模块卡件接口Micro SD卡插槽位于设备的右侧（图2），与OLED显示屏齐平。此端口在发布时不起作用。一旦功能正常，它将支持第2.1.8节中讨论的可移动数据存储设备功能。该接口支持SD、SDHC和SDXCµSD卡，最高版本为3.0。将卡插入插槽，方向如下所述。施加压力，直到你感觉到一些阻力。该卡将锁定到位，然后可以被设备读取。再次施加压力，将卡从插槽GE VMEMB-Z004通用电气模块卡件 Micro SD和USB引脚中取出请注意，µSD卡需要以正确的方向插入插槽。卡的引脚需要朝向设备的正面（图4）。提供了一个盖子和螺丝。为了最大限度地降低CPE400对电噪声干扰的敏感性，请在正常操作期间将盖子固定到位。GE VMEMB-Z004通用电气模块卡件
GE VMEMB-Z004Card Interface The Micro SD Card slot is located on the right-hand side of the equipment (Figure 2), level with the OLED display. This port is not functional at time of publication. Once functional, it will support the Removable Data Storage Device features discussed in Section 2.1.8.GE VMEMB-Z004CThe interface supports SD, SDHC and SDXC µSD-Cards up to Version 3.0. Insert the card into to slot, oriented as described below. Apply pressure it until you feel some resistance. The card will latch into place and can then be read by the equipment. Apply pressure again to remove the card from the sloGE VMEMB-Z004C Micro-SD & USB Pinouts Note that the µSD-Card needs to be inserted in the slot with the correct orientation. The pins of the card need to face towards the front of the equipment (Figure 4). A cover and screw are provided. To minimize CPE400 susceptibility to electrical noise interference, keep the cover in place during normal operation.GE VMEMB-Z004
2. 产 品 展 示
3. 主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
