ABB 5SHX1060H0002 3BHL00038P0101工控备件模块
1.产 品 详 情 资 料：
ABB 5SHX1060H0002和3BHL00038P0101是ABB公司的产品型号，其中5SHX1060H0002是ABB公司的电流传感器，3BHL00038P0101是ABB公司的变频器。
关于5SHX1060H0002电流传感器的配置说明和使用，具体步骤如下：
电源连接：将电流传感器的电源接线板连接到交流电源，保证电源接线板与电流传感器的接口紧密贴合。
测量环连接：将测量环套在需要测量电流的电缆或电器上，然后将测量环的输出接线板连接到电流传感器的输入接线板上。
输出信号连接：将电流传感器的输出接线板连接到需要接收电流信号的仪表或控制器上。
调试检查：在使用前，需要进行一些调试和检查工作，例如检查电源和接线板的连接是否紧固，检查测量环是否正确套在电缆或电器上，检查输出信号是否正确连接。
关于3BHL00038P0101变频器的配置说明和使用，具体步骤如下：
电源连接：将变频器的电源接线板连接到交流电源，保证电源接线板与变频器的接口紧密贴合。
电机连接：将变频器的电机接线板连接到需要控制的电机上，保证电机接线板与电机的接口紧密贴合。
控制信号连接：将变频器的控制信号接线板连接到需要发送控制信号的仪表或控制器上。
ABB 5SHX1060H0002 and 3BHL00038P0101 are product models of ABB company, where 5SHX1060H0002 is a current sensor of ABB company, and 3BHL00038P0101 is a frequency converter of ABB company.
The specific steps for configuring and using the 5SHX1060H0002 current sensor are as follows:
Power connection: Connect the power wiring board of the current sensor to the AC power supply to ensure that the power wiring board and the interface of the current sensor closely fit.
Measuring ring connection: Wrap the measuring ring on the cable or appliance that needs to measure current, and then connect the output terminal block of the measuring ring to the input terminal block of the current sensor.
Output signal connection: Connect the output wiring board of the current sensor to the instrument or controller that needs to receive the current signal.
Commissioning and inspection: Before use, it is necessary to carry out some commissioning and inspection work, such as checking whether the connection between the power supply and the wiring board is tight, checking whether the measuring ring is correctly sheathed on the cable or electrical appliance, and checking whether the output signal is correctly connected.
The specific steps for configuring and using the 3BHL00038P0101 frequency converter are as follows:
Power connection: Connect the power wiring board of the frequency converter to the AC power supply to ensure that the power wiring board and the interface of the frequency converter closely fit.
Motor connection: Connect the motor wiring board of the frequency converter to the motor that needs to be controlled, ensuring that the motor wiring board closely fits the interface of the motor.
Control signal connection: Connect the control signal wiring board of the frequency converter to the instrument or controller that needs to send control signals.
2.产 品 展 示
3. 主 营 产 品
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
