ABB PFCL 201C-50.0KN 3BSE027070R50力度测量
1.产 品 详 情 资 料：
ABB PFCL 201C-50.0KN 3BSE027070R50 是一种电力保护继电器，用于保护电力系统中的负载和线路免受过载、短路和地面故障等电力异常情况的影响。以下是该继电器的配置说明和应用领域：
ABB PFCL 201C-50.0KN 3BSE027070R50配置说明：
- ABB PFCL 201C-50.0KN 3BSE027070R50继电器采用数字信号处理器（DSP）和模拟信号处理器（ASP）进行信号处理和控制。
- 输入电压范围为 85-265 V AC/DC。
- 输出电压范围为 250 V AC/DC，最大负载电流为 5 A。
- 该继电器可编程，可根据不同的保护要求进行配置，如过载保护、短路保护、地面故障保护等。
- ABB PFCL 201C-50.0KN 3BSE027070R50可以与其他保护设备和控制系统进行通信，如变压器保护、发电机保护、断路器保护等。
ABB PFCL 201C-50.0KN 3BSE027070R50应用领域：
- 电力系统的保护：ABB PFCL 201C-50.0KN 3BSE027070R50可用于保护变压器、发电机、断路器等电力设备和线路，防止由于电力异常情况造成的设备损坏或线路中断。
- 工业自动化控制系统：ABB PFCL 201C-50.0KN 3BSE027070R50可用于控制工业自动化系统中的各种设备和线路，防止由于电力异常情况造成的设备损坏或生产中断。
- 电气设备的监测和保护：ABB PFCL 201C-50.0KN 3BSE027070R50可用于监测和保护各种电气设备，如电动机、变频器等，防止由于电力异常情况造成的设备损坏或停机。
ABB PFCL 201C-50.0KN 3BSE027070R50 is a power protection relay used to protect loads and lines in power systems from overload, short circuit, ground fault, and other abnormal electrical conditions. The following are the configuration instructions and application fields of this relay:
Configuration Description:
The relay uses a digital signal processor (DSP) and an analog signal processor (ASP) for signal processing and control.
The input voltage range is 85-265 V AC/DC.
The output voltage range is 250 V AC/DC, and the maximum load current is 5 A.
The relay is programmable and can be configured according to different protection requirements, such as overload protection, short circuit protection, ground fault protection, etc.
It can communicate with other protection equipment and control systems, such as transformer protection, generator protection, circuit breaker protection, etc.
Application field:
Power system protection: This relay can be used to protect power equipment and lines such as transformers, generators, circuit breakers, and prevent equipment damage or line interruption caused by abnormal power conditions.
Industrial automation control system: This relay can be used to control various equipment and circuits in industrial automation systems to prevent equipment damage or production interruption caused by abnormal power conditions.
Monitoring and protection of electrical equipment: This relay can be used to monitor and protect various electrical equipment, such as motors, frequency converters, etc., to prevent equipment damage or shutdown caused by abnormal electrical conditions.
2.产 品 展 示
3.公 司 优 势 主 营 产 品
4. 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
