HARMONIC SC-510-5-230-S0输入输出模块
1.产 品 详 情 资 料：
有关通信端口和接口技术数据的详细信息，请参阅3BSE3036351R，AC 800M-控制器硬件、硬件和操作。如果在CPU正常通电后安装了电池，则第265页表63中的数字有效，允许激活内存备份功能。内部电池最短158小时外部电池SB821最短15周外部电池SB822注意：空电池的充电时间约为7小时。充满电后至少16天PM866处理器单元的性能数据约为PM864性能的1.4倍。在冗余配置中，执行性能略低于单一配置。在冗余配置中，从主CPU到备份CPU的切换时间小于10毫秒。关键功能•MPC8270微处理器在450 MHz下运行。•256 MB RAM，带完整性检查（影子内存）。•光学模块总线接口，设计用于最多七个集群，包括十二个非冗余或六个冗余模块（即7x12=84个模块）。冗余模块和非冗余模块可以组合使用。
For details on Technical data for communication ports and interfaces, For details, refer to 3BSE036351R, AC 800M - Controller Hardware, Hardware and Operation.The figures in Table 63 on page 265 are valid if the batteries have been installed after a normal CPU power-up, allowing for the memory backup function to be activated.Internal battery Minimum 158 hours External battery SB821 Minimum 15 weeks External battery SB822 Note: Recharge time for an empty battery is approximately 7 hours. Minimum 16 days when fully charged The PM866 processor unit has performance data which is approximately 1.4 times the performance of PM864. In redundant configuration the execution performance is somewhat lower than in single configuration. Switch over time from Primary CPU to Backup CPU, in redundant configuration, is less than 10 ms.Key Features • MPC8270 Microprocessor running at 450 MHz. • 256 MB RAM with integrity check (shadow memory). • Optical ModuleBus interface that is designed for a maximum of seven clusters, of twelve non-redundant or six redundant modules (that is, 7x12 = 84 modules). Redundant and nonredundant modules can be combined.
2.产 品 展 示
3.公 司 优 势 主 营 产 品
4.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
