ABB DI524 1SAP240000R0001数字输入模块
1.产 品 详 情 资 料：
ABB DI524 1SAP240000R0001电源故障后，不再对应用程序进行热重新启动，而是使用控制器中定期保存的冷保留标记值重新启动SIL3应用程序，循环时间由用户设置。冷重新启动应用程序重新启动。除非标记为“冷保留”，ABB DI524 1SAP240000R0001否则将初始化变量值。要启动冷重启，必须短按INIT按钮（少于2.5秒）重启控制器。冗余配置中的冷重启要重新启动冗余配置中运行的CPU：1。对备份CPU执行控制器重置（见下文）。系统将进入单CPU状态。2.等待几秒钟，然后按下INIT（初始）按钮少于2.5秒，重新启动主CPU。3.系统将再次升级到同步CPU状态。控制器重置系统停止。应用程序和变量被删除。要启动控制器重置，按住控制器INIT按钮（超过三秒），直到运行LED开始闪烁。如果系统处于未定义位置，因此用户无法使用，则必须执行控制器重置。冗余配置中的控制器重置按照以下步骤在冗余配置中执行控制器重置：1。执行备份CPU的控制器重置。系统将进入单CPU状态。2.等待几秒钟，然后在主CPU上执行控制器重置。ABB DI524 1SAP240000R0001
After a power fail, instead of doing a warm restart of the application SIL3 applications are restarted using cold retain marked values saved in the controller periodically with a cycle time set by the user.Cold Restart The application program restarts. Variable values are initialized unless marked Cold retain. To initiate a cold restart, the Controller must be restarted by briefly pressing the INIT push button (less than 2.5 seconds). Cold Restart in Redundant Configuration To restart CPUs running in redundant configuration: 1. Perform a Controller Reset of the backup CPU (see below). The system will go into single CPU state. 2. Wait a few seconds and then restart the Primary CPU by pressing the INIT push button less than 2.5 seconds. 3. The system will be upgraded to synchronized CPU state once again.ABB DI524 1SAP240000R0001Controller Reset The system stops. The application program and variables are erased. To initiate Controller Reset, press and hold the Controller INIT push button (more than three seconds) until the Run LED begins to flash. A Controller Reset must be performed if the system is in an undefined position and consequently unavailable to the user. Controller Reset in Redundant Configuration Follow the steps below to perform a Controller Reset in redundant configuration: 1. Perform a Controller Reset of the backup CPU. The system will go single CPU state. 2. Wait a few seconds and then perform a Controller Reset on the Primary CPU.ABB DI524 1SAP240000R0001
2.产 品 展 示
3.公 司 优 势 主 营 产 品
4.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
