ABB UBC717AE01 HIEE300927R0101高压变频器配件
1.产 品 详 情 资 料:
ABB UBC717AE01 HIEE300927R0101是一款智能型通讯模块,以下是一些特点、使用方法和参数规格:
特点:
- 支持多种通讯协议,包括Modbus、Profibus DP和DeviceNet等;
- 具有可编程的数据传输速率和数据格式;
- 内置实时时钟和电池备份;
- 具有多种安全性特性,如密码保护和访问控制。
使用方法:
- 连接模块:将模块插入到相应的插槽中,并将通讯电缆连接到模块的端口上;
- 配置参数:使用ABB提供的配置软件对模块进行参数配置;
- 进行通讯:使用相应的通讯协议和设备进行通讯。
参数规格:
- 工作电压:24VDC;
- 通讯速率:最高可达12Mbps;
- 通讯协议:支持Modbus、Profibus DP和DeviceNet等;
- 工作温度:-25℃~+70℃;
- 尺寸:高度为93mm,宽度为30mm,深度为110mm;
- 重量:约100g。
需要注意的是,以上参数仅供参考,实际参数可能会根据具体型号和配置而有所不同。在使用ABB UBC717AE01 HIEE300927R0101时,请务必参考其详细的使用手册和相关文档。
ABB UBC717AE01 HIEE300927R0101 is an intelligent communication module. The following are some features, usage methods and parameter specifications:
characteristic:
Support a variety of communication protocols, including Modbus, Profibus DP and DeviceNet;
With programmable data transmission rate and data format;
Built-in real-time clock and battery backup;
It has a variety of security features, such as password protection and access control.
usage method:
Connection module: insert the module into the corresponding slot and connect the communication cable to the port of the module;
Configuration parameters: use the configuration software provided by ABB to configure the parameters of the module;
Communication: use corresponding communication protocol and equipment to communicate.
Parameter specification:
Working voltage: 24VDC;
Communication rate: up to 12Mbps;
Communication protocol: support Modbus, Profibus DP, DeviceNet, etc;
Working temperature: - 25 ℃~+70 ℃;
Dimensions: 93mm high, 30mm wide and 110mm deep;
Weight: about 100g.
It should be noted that the above parameters are for reference only, and the actual parameters may vary according to the specific model and configuration. When using ABB UBC717AE01 HIEE300927R0101, please refer to its detailed user manual and relevant documents.
2.产 品 展 示
3.公 司 优 势 主 营 产 品
4.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网,转载请附上此链接:http://www.jiangxidcs.com