BENTLY 3500/92-02-01-00运动控制器模块
1.产 品 介 绍
品牌:BENTLY
型号说明:BENTLY 3500/92-02-01-00运动控制器模块
优势:供应进口原装正品,专业停产配件。
公司主营特点:主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。
2.产 品 详 情 资 料:
BENTLY 3500/92-02-01-00是一种机械振动监测模块,可用于监测和分析旋转机械的振动状况。以下是该产品的特点介绍、使用方法以及参数规格:
特点介绍:
- 支持多个振动测点的实时监测和数据采集
- 可以对多个振动参数(包括加速度、速度和位移)进行监测和分析
- 支持多种通信接口,包括Modbus、Ethernet和RS-485
- 具有高精度、高可靠性和高稳定性,可在恶劣的工业环境中长期运行
- 内置多种诊断功能,包括电缆故障检测、传感器故障检测和数据质量检测等
使用方法:
- 安装:将3500/92-02-01-00模块插入到BENTLY 3500系统的机架上,并连接传感器和数据采集器。
- 配置:使用BENTLY 3500系统软件对模块进行配置,设置监测参数、报警阈值和通信参数等。
- 监测:启动监测程序,实时监测振动信号和参数,并记录数据。
- 分析:使用BENTLY 3500系统软件对采集的数据进行分析和诊断,识别故障原因,并采取相应的措施。
参数规格:
- 供电电压:24VDC
- 通信接口:Modbus、Ethernet、RS-485
- 振动参数:加速度、速度、位移
- 监测范围:0-50g(加速度)、0-50mm/s(速度)、0-500um(位移)
- 采样率:102.4kHz
- 工作温度范围:-40℃到+70℃
- 尺寸:106.7mm x 19.1mm x 130.2mm
- 重量:约0.3kg
BENTLY 3500/92-02-01-00 is a mechanical vibration monitoring module that can be used to monitor and analyze the vibration of rotating machinery. The following are the features, use methods and parameter specifications of the product:
Features:
Support real-time monitoring and data acquisition of multiple vibration measuring points
Multiple vibration parameters (including acceleration, velocity and displacement) can be monitored and analyzed
Support a variety of communication interfaces, including Modbus, Ethernet and RS-485
With high precision, high reliability and high stability, it can operate in harsh industrial environment for a long time
Built-in multiple diagnostic functions, including cable fault detection, sensor fault detection, data quality detection, etc
usage method:
Installation: Insert the 3500/92-02-01-00 module into the rack of the BENTLY 3500 system, and connect the sensor and data collector.
Configuration: use BENTLY 3500 system software to configure the module, set monitoring parameters, alarm threshold and communication parameters.
Monitoring: start the monitoring program, monitor the vibration signals and parameters in real time, and record the data.
Analysis: use BENTLY 3500 system software to analyze and diagnose the collected data, identify the cause of the fault, and take corresponding measures.
Parameter specification:
Power supply voltage: 24VDC
Communication interface: Modbus, Ethernet, RS-485
Vibration parameters: acceleration, velocity, displacement
Monitoring range: 0-50g (acceleration), 0-50mm/s (speed), 0-500um (displacement)
Sampling rate: 102.4kHz
Operating temperature range: - 40 ℃ to+70 ℃
Size: 106.7mm x 19.1mm x 130.2mm
Weight: about 0.3kg
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网,转载请附上此链接:http://www.jiangxidcs.com