BENTLY 3500/95系统集成显示器
1.产 品 介 绍
品牌：BENTLY
型号说明：BENTLY 3500/95系统集成显示器
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
BENTLY 3500/95是一种机械振动监测和保护系统，主要用于监测旋转机械设备（如轴承、齿轮箱、发动机、泵等）的振动和状态，以及提供相应的报警和保护功能。下面是该产品的特点介绍、使用方法和参数规格：
特点介绍：
- 高可靠性：采用可编程的逻辑控制器，能够自动诊断系统状态，确保高可靠性。
- 多种测量方式：支持速度、加速度、位移等多种振动测量方式，可适用于不同类型的机械设备。
- 灵活配置：可灵活配置多种传感器、探头和信号放大器，以适应不同的监测要求。
- 大容量存储：内置存储器可存储多种状态数据和事件记录，有助于诊断和排除故障。
- 实时监测：可实时监测机械设备的振动状态，并在异常情况下发出报警和保护信号。
使用方法：
- 安装传感器和探头：将传感器和探头安装在机械设备上，并连接到BENTLY 3500/95系统。
- 配置系统参数：使用BENTLY 3500/95的软件界面，配置系统参数，如测量方式、传感器类型、警戒值等。
- 监测和分析数据：BENTLY 3500/95系统会实时监测机械设备的振动状态，并将数据记录下来。用户可以使用软件界面进行数据分析和故障诊断。
- 发出报警和保护信号：当机械设备的振动状态异常时，BENTLY 3500/95系统会发出报警和保护信号，以保护机械设备。
参数规格：
- 测量范围：速度（0-300 mm/s）、加速度（0-25 g）和位移（0-5 mm）。
- 分辨率：速度（0.01 mm/s）、加速度（0.001 g）和位移（0.001 mm）。
- 采样率：可达到102.4 kHz。
- 存储容量：可存储100,000个样本。
- 通讯接口：支持以太网、RS-232和RS-485接口。
BENTLY 3500/95 is a mechanical vibration monitoring and protection system, which is mainly used to monitor the vibration and status of rotating mechanical equipment (such as bearings, gear boxes, engines, pumps, etc.) and provide corresponding alarm and protection functions. The following are the features, use methods and parameter specifications of the product:
Features:
High reliability: the programmable logic controller can automatically diagnose the system status to ensure high reliability.
Multiple measurement methods: support multiple vibration measurement methods such as speed, acceleration and displacement, which can be applied to different types of mechanical equipment.
Flexible configuration: multiple sensors, probes and signal amplifiers can be flexibly configured to meet different monitoring requirements.
Mass storage: The built-in memory can store a variety of status data and event records, which is helpful for diagnosis and troubleshooting.
Real-time monitoring: It can monitor the vibration status of mechanical equipment in real time, and send out alarm and protection signals under abnormal conditions.
usage method:
Install the sensor and probe: install the sensor and probe on the mechanical equipment and connect to the BENTLY 3500/95 system.
Configure system parameters: use the software interface of BENTLY 3500/95 to configure system parameters, such as measurement method, sensor type, warning value, etc.
Monitoring and analysis of data: The BENTLY 3500/95 system will monitor the vibration status of mechanical equipment in real time and record the data. The user can use the software interface for data analysis and fault diagnosis.
Send alarm and protection signals: When the vibration state of mechanical equipment is abnormal, BENTLY 3500/95 system will send alarm and protection signals to protect mechanical equipment.
Parameter specification:
Measurement range: speed (0-300 mm/s), acceleration (0-25 g) and displacement (0-5 mm).
Resolution: velocity (0.01 mm/s), acceleration (0.001 g) and displacement (0.001 mm).
Sampling rate: 102.4 kHz.
Storage capacity: 100000 samples can be stored.
Communication interface: support Ethernet, RS-232 and RS-485 interfaces.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
