BENTLY 3500/61C振动变送器监测器
1.产 品 介 绍
品牌：BENTLY
型号说明：BENTLY 3500/61C振动变送器监测器
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
ENTLY 3500/61C是一款高级振动监测和机械保护系统，其主要特点如下：
高度可靠：BENTLY 3500/61C采用高精度振动传感器和先进的信号处理技术，可实时监测和诊断机器的振动状况，并提供精确的机械保护。
多功能性：BENTLY 3500/61C不仅可以监测振动，还可以监测轴承温度、轴承金属磨损、冲击和速度等参数，提供完整的机器状态信息。
网络化：BENTLY 3500/61C可通过网络接口实现与计算机或PLC的通信，方便数据采集和监测。
易于操作：BENTLY 3500/61C的图形用户界面直观易用，支持多语言，便于操作和设置参数。
使用方法：
安装：将振动传感器和其他相关设备安装到机器上，并连接到BENTLY 3500/61C的输入端口。
配置：使用BENTLY 3500/61C的图形用户界面，设置振动监测参数、机器保护阈值和报警通知方式等。
监测：启动BENTLY 3500/61C系统，开始实时监测机器状态，同时记录历史数据和事件。
参数规格：
输入通道：4个振动输入通道、4个轴承温度输入通道、4个速度输入通道。
振动监测范围：0-10g RMS，0-20g peak。
轴承温度监测范围：-50℃至+150℃。
速度监测范围：0-30 mm/s，0-150 mm/s。
数据采样率：5120样本/秒。
通信接口：以太网、Modbus TCP/IP、Modbus RTU、RS485等。
支持的协议：HART、Foundation Fieldbus等。
电源需求：100-240VAC，50/60Hz。
ENTLY 3500/61C is an advanced vibration monitoring and mechanical protection system with the following main features:
Highly reliable: BENTLY 3500/61C adopts high-precision vibration sensor and advanced signal processing technology, which can monitor and diagnose the vibration condition of the machine in real time and provide accurate mechanical protection.
Multi-functionality: BENTLY 3500/61C can not only monitor vibration, but also monitor bearing temperature, bearing metal wear, impact, speed and other parameters, providing complete machine status information.
Networking: BENTLY 3500/61C can communicate with computer or PLC through network interface to facilitate data acquisition and monitoring.
Easy to operate: The graphical user interface of BENTLY 3500/61C is intuitive and easy to use, supports multiple languages, and is easy to operate and set parameters.
usage method:
Installation: Install the vibration sensor and other related equipment on the machine and connect it to the input port of BENTLY 3500/61C.
Configuration: use the graphical user interface of BENTLY 3500/61C to set vibration monitoring parameters, machine protection threshold and alarm notification mode.
Monitoring: Start the BENTLY 3500/61C system, start real-time monitoring of machine status, and record historical data and events.
Parameter specification:
Input channels: 4 vibration input channels, 4 bearing temperature input channels and 4 speed input channels.
Vibration monitoring range: 0-10g RMS, 0-20g peak.
Bearing temperature monitoring range: - 50 ℃ to+150 ℃.
Speed monitoring range: 0-30 mm/s, 0-150 mm/s.
Data sampling rate: 5120 samples/second.
Communication interface: Ethernet, Modbus TCP/IP, Modbus RTU, RS485, etc.
Supported protocols: HART, Foundation Fieldbus, etc.
Power demand: 100-240VAC, 50/60Hz.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
