BENTLY 3500/22-01-01监测卡件模块
1.产 品 介 绍
品牌：BENTLY
型号说明：BENTLY 3500/22-01-01监测卡件模块
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
产品特点：
- 支持多种振动和温度传感器类型，包括加速度、速度、位置、温度传感器等。
- 可实时监控旋转机械设备的振动、温度等参数，支持多种信号处理方法，包括峰值、有效率、速度、加速度等。
- 支持多种通信接口，包括RS232、RS485、以太网等，方方便数据传输和设备管理。
- 支持多种报警和故障诊断故障能力，可根据设置的实时报警和记录异常事件。
产品编号：
- 输入信号：1路振动信号，1路温度信号。
- 输入范围：振动信号：加速0-30g、速度0-5in/s、位移0-5mil；温度信号：-50℃ ~ +125℃。
- 数据采集速度：可配置，最高可达10240次/秒。
- 通讯接口：RS232、RS485、以太网。
- 电源要求：+24VDC。
- 工作温度：-40℃ ~ +85℃。
- 尺寸：标准3U高，广度约为13.3cm。
使用方法：
安装模块：将3500/22-01-01模块插入到BENTLY 3500机架上的一个空隙位置中。确保模块已正确安装并牢固。
连接传感器：连接振动和温度传感器到模块的输入端口，确保连接正确无误。
配置参数：使用BENTLY 3500系列软件或手持终端配置模块的参数，包括采集率、信息处理方法、报警郭值等。
监测：启动弯曲3500软件软件终端手持终端终端手持手持监测的振动和温度等等参数参数。如有发生异常情况发生异常异常异常
总之，BENTLY 3500/22-01-01模块是一款高性能、可靠的振动监测模块，适用于各种旋转机械设备的故障诊断和预测性维护。
Product features:
Support a variety of vibration and temperature sensor types, including acceleration, speed, position, temperature sensor, etc.
It can monitor the vibration, temperature and other parameters of rotating mechanical equipment in real time, and support a variety of signal processing methods, including peak value, efficiency, speed, acceleration, etc.
Support a variety of communication interfaces, including RS232, RS485, Ethernet, etc., to facilitate data transmission and equipment management.
It supports multiple alarm and fault diagnosis capabilities, and can alarm and record abnormal events in real time according to the settings.
Product No.:
Input signal: 1 vibration signal, 1 temperature signal.
Input range: vibration signal: acceleration 0-30g, speed 0-5in/s, displacement 0-5mil; Temperature signal: - 50 ℃~+125 ℃.
Data acquisition speed: configurable, up to 10240 times/second.
Communication interface: RS232, RS485, Ethernet.
Power requirement:+24VDC.
Working temperature: - 40 ℃~+85 ℃.
Size: standard 3U high, width about 13.3cm.
usage method:
Install the module: Insert the 3500/22-01-01 module into a vacant position on the BENTLY 3500 rack. Ensure that the module is properly installed and secure.
Connect the sensor: connect the vibration and temperature sensor to the input port of the module, and ensure that the connection is correct.
Configuration parameters: use BENTLY 3500 series software or handheld terminal configuration module parameters, including acquisition rate, information processing method, alarm threshold, etc.
Monitoring: Start bending 3500 software terminal handheld terminal handheld monitoring vibration, temperature and other parameters. In case of any abnormity, abnormity
In short, BENTLY 3500/22-01-01 module is a high-performance and reliable vibration monitoring module, which is applicable to fault diagnosis and predictive maintenance of various rotating machinery equipment.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
