HONEYWELL CC-PDIL01 51405040-175数字输入模块
1.产 品 介 绍
品牌：HONEYWELL
型号说明：HONEYWELL CC-PDIL01 51405040-175数字输入模块
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
HONEYWELL CC-PDIL01 51405040-175一个冗余电源为AC 800M单元供电，另一个用于为现场设备供电。SA/SB错误指示不能指示发生故障的物理电源，只能指示存在故障。图47。使用单电源连接SA/SB为了避免使用单电源时SA/SB出现错误指示，建议将CPU上的输入端子SA/SB连接到+24 V，a安装SB821外部电池单元使用以下步骤连接外部电池单元：HONEYWELL CC-PDIL01 51405040-1751。将SB821外部电池单元安装在DIN导轨上的适当位置。2.连接SB821外部电池单元时，使用2米（2.2码）电缆TK821V020。将一端插入电池单元，另一端插入PM8xx处理器单元的外部电池电源插座（参见第32页的图2）。3.在包含两个HONEYWELL CC-PDIL01 51405040-175处理器单元的冗余CPU配置中，还使用两个SB821电池单元，每个处理器单元一个。HONEYWELL CC-PDIL01 51405040-175
one redundant power supply powering the AC 800M units and one for powering field equipment. An SA/SB error indication can not indicate which physical power supply that has failed, only that there is a failure. Figure 47. Connection of SA/SB using Single Power Supply To avoid error indications from SA/SB when single power supply is used,HONEYWELL CC-PDIL01 51405040-175 it is recommended to connect the input terminals SA/SB on the CPU to +24 V,aInstalling the SB821 External Battery Unit Use the following procedure to connect the external battery unit: 1. Mount the SB821 external battery unit at a suitable position on the DIN-rail. 2. For connecting the SB821 external battery unit, use the 2 m (2.2 yd) cable TK821V020. Plug one end into the battery unit and the other into the external battery supply socket of the PM8xx processor unit (see Figure 2 on page 32). 3. In redundant CPU configuration containing two HONEYWELL CC-PDIL01 51405040-175processor units, use also two SB821 battery units, one for each processor unit.HONEYWELL CC-PDIL01 51405040-175
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
