NI PXI-8432/2串行接口卡
1.产 品 介 绍
品牌：NI
型号说明：NI PXI-8432/2串行接口卡
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
安装IEC NI PXI-8432/2由处理器单元通过CEX总线供电，无需额外的外部电源。安装CI868:1。将装置安装到DIN导轨上，请参见第65页的“将AC 800M装置安装到DINRail上”。2.将100Mbps以太网双绞线连接到基板上的CH1连接器。3.通过标准以太网组件将以太网电缆的另一端连接到快速以太网网络。对于通过IEC 61850认证的开关，请参阅NI PXI-8432/2的开关管理。安装AF 100接口CI869 CI869单元由处理器单元通过CEX总线供电，无需额外的外部电源。安装CI869:1。将CI869装置安装到DIN导轨上。NI PXI-8432/2参见第65页将AC 800M装置安装到DIN导轨上。2.将AF 100双绞线连接到NI PXI-8432/2的4针触点。如果是冗余介质，请将另一对AF 100双绞线连接到另一个4针触点。3.将双绞线的另一端连接到AF 100总线。有关AF 100连接的详细信息，请参阅Advant Fieldbus 100用户手册NI PXI-8432/2
Installing the IEC 61850 InterfaceNI PXI-8432/2is powered from the processor unit via the CEX-Bus with no additional external power source required. To install CI868: 1. Mount the unit onto the DIN-rail, see Mounting AC 800M Units onto DINRailon page 65. 2. Connect the 100Mbps Ethernet twisted pair cable to the CH1 connector on the baseplate. 3. Connect the other end of the Ethernet cable to a Fast Ethernet network via standard Ethernet components. Refer to PTUST04-3211- Switch Management for IEC 61850 for switches that are certified for IECNI PXI-8432/2Installing the AF 100 Interface CI869 The CI869 unit is powered from the processor unit via the CEX-Bus with no additional external power source required. To installNI PXI-8432/2: 1. Mount the CI869 unit onto the DIN-rail. See Mounting AC 800M Units onto DIN-Rail on page 65. 2. Connect the AF 100 twisted pair to the 4-pin contact of CI869. In case of redundant media, connect the other AF 100 twisted pair to the other 4-pin contact. 3. Connect the other end of the twisted pair to the AF 100 bus. For details on AF 100 connections, refer to the Advant Fieldbus 100 User ManualNI PXI-8432/2
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
