WOODWARD 5466-458转速控制模块
1.产 品 介 绍
品牌：WOODWARD
型号说明：WOODWARD 5466-458转速控制模块
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
在单一配置中安装WOODWARD 5466-458使用以下步骤以单一配置中的PM891处理器单元：1。如果已连接，请从WOODWARD 5466-458处理器单元一侧卸下CEX总线终端。2.将WOODWARD 5466-458处理器单元、通信接口和S800 I/O单元安装在DIN导轨上。PM891的通信接口连接到处理器单元左侧的CEX总线。WOODWARD 5466-458的S800 I/O单元通过处理器单元底部的光模块总线连接。3.将总线终端重新插入离处理器单元最远的通信单元。对于CEX总线，如果使用CEX总线扩展电缆TK850，则使用TB850终端插头（TB851）。如果CEX总线上未使用任何单元，则不需要总线终端。4。通过在处理器单元顶部的RCU控制链路连接器处使用端接插头WOODWARD 5466-458RCU控制链接端接器，为冗余提供端接。5.提供电缆连接：a.将电源线连接到螺丝端子L+和L-。如果适用，将SS82x的电源监控信号连接到螺丝端子SA和SB。b.将控制网络电缆连接到CN1（单连接）或CN1+CN2（冗余连接）。c.使用电缆TK212将Control Builder连接到COM4（如果需要，用于更改IP地址）。否则，将Control Builder连接到控制网络。
Installing WOODWARD 5466-458 in Single Configuration Use the procedure below to install the WOODWARD 5466-458 processor unit in single configuration: 1. If already connected, remove the CEX-Bus termination from the side of theWOODWARD 5466-458 processor unit. 2. Mount the PM891 processor unit, the communication interfaces, and the S800 I/O units on the DIN-rail. The communication interfaces for PM891 is connected to the CEX-Bus to the left of the processor unit. The S800 I/O units forWOODWARD 5466-458 is connected through the optical ModuleBus at the bottom of the processor unit. 3. Re-insert the bus terminations into the communication units farthest from the processor unit. For CEX-Bus, use the TB850 termination plug (TB851, if CEX-Bus Extension cable TK850 is used. If no units are used on the CEX-Bus, no bus termination is required. 4. Provide termination for redundancy, by using the termination plug TB853 RCU Control Link Terminator, at the RCU Control Link connector at the top of the processor unit. 5. Provide cable connections: a. Connect the power leads to screw terminals L+ and L-. If applicable, connect the power supervision signals from SS82x to the screw terminals SA and SB. b. Connect the Control Network cables to CN1 (single connection) or CN1 + CN2 (redundant connection). c. Connect the Control Builder to COM4 with cable TK212 (if required, for changing an IP address). Otherwise connect the Control Builder to the Control Network.WOODWARD 5466-458
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
