WOODWARD 5466-425工控控制卡件
1.产 品 介 绍
品牌：WOODWARD
型号说明：WOODWARD 5466-425工控控制卡件
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
安装阶段结束时，务必安装新的内部或外部电池。WOODWARD 5466-425由于系统安装期间经常停电，原始电池被大量使用。通信端口CN1和CN2控制网络连接到一个或两个RJ45连接器（CN1和CN 2），具体取决于网络选项（单个或冗余）。使用用于IEEE802.3（以太网）的RJ45连接器连接到5类屏蔽双绞线电缆（STP等级5）。5级或更高，电缆10/100BaseT/TX，最大100米（110码）。ABB建议在工业环境中使用光纤，例如62.5/125 100BaseFX，最大距离1500米（1600码）。WOODWARD 5466-425A仅限于一个以太网（CN1）端口，因此冗余以太网不可用。COM3端口COM3是带有调制解调器信号的RS-232C端口。该端口用于Modbus、Siemens 3964R、COMLI或定制设计等串行协议。COM4端口COM4端口是RS-232C端口，光隔离，无调制解调器信号。当直接连接到控制器时，将Control Builder连接到该端口；如果不需要，则无需通过控制网络使用远程工具连接。WOODWARD 5466-425
Always install a fresh internal or external battery at the end of the installation phase. The original battery is heavily utilized due to frequent blackouts during system installation.WOODWARD 5466-425Communication Ports CN1 and CN2 The control network connects to one or two RJ45 connectors (CN1 and CN2) depending on network option (single or redundant). Use an RJ45 connector for IEEE802.3 (Ethernet) for connecting to a category 5 Shielded Twisted Pair cable (STP class 5). Class 5, or higher, cable 10/100BaseT/TX max 100 m (110 yd). ABB recommends the use of optical fiber in an industrial environment, for example 62.5/125 100BaseFX, max. distance 1500 m (1600 yd).WOODWARD 5466-425 is restricted to one Ethernet (CN1) port, thus redundant Ethernet is not available.COM3 Port The COM3 is an RS-232C port with modem signals. This port is used for serial protocols such as Modbus, Siemens 3964R, COMLI or custom-design.COM4 Port The COM4 port is an RS-232C port, opto-isolated and without modem signals. Connect Control Builder to this port when connecting directly to the controller, or, when not required, without the need use the remote tool connection via the Control Network.WOODWARD 5466-425
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
