WOODWARD 5466-355数字量输入卡件
1.产 品 介 绍
品牌：WOODWARD
型号说明：WOODWARD 5466-355数字量输入卡件
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
必须将锁定装置置于锁定位置，以避免振动和/或间歇性接地可能引起的问题。WOODWARD 5466-355装置的安装程序在DIN导轨上安装任何处理器装置或通信接口之前，请仔细阅读设备随附的安装说明。要将PM891装置安装在DIN导轨上，需要将刀片螺丝刀牢固地安装在装置锁定螺钉（1 mm槽）中。有关装置锁定螺钉的详细信息，请参见第71页的图20。将WOODWARD 5466-355装置安装在DIN导轨上：1。将锁定装置旋转至打开位置（1），将装置后部的上唇牢牢钩住DIN导轨的上边缘，然后轻轻将装置完全卡入安装位置。2.将锁定装置旋转至滑动位置（2），沿DIN导轨将装置滑动至所需的安装位置，并使用连接器插头和插座将其轻轻地连接至相邻的装置底板。图19。AC 800M控制器（PM891除外）–侧视图为防止损坏引脚，确保基板插头和插座在装置互连时完全对齐。不要用力过猛。WOODWARD 5466-355
It is essential that the locking device be placed in the LOCKED position to avoid possible problems caused by vibration and/or intermittent grounding.Mounting Procedure for PM891 Unit Before mounting any processor unit or communication interface on the DIN-rail, read carefully the installation instructions provided with the equipment.WOODWARD 5466-355To mount the PM891 unit on the DIN-rail, a blade screwdriver that fits securely into the unit locking screw (1 mm slot) is required. For details about the unit locking screw, see Figure 20 on page 71. To mount the PM891 unit on the DIN-rail: 1. Rotate the locking device to the OPEN position (1), hook the upper lip at the rear of the unit securely over the upper edge of the DIN-rail, and gently snap the unit fully into the mounting position. 2. Rotate the locking device to the SLIDE position (2), slide the unit along the DIN-rail to the desired mounting position, and using the connector plugs and sockets gently attach it to the adjacent unit baseplate. Figure 19. AC 800M Controller (except PM891) – Side View To prevent damage to the pins, ensure that the baseplate plugs and sockets are fully aligned as the units interconnect. Do not apply excessive force.WOODWARD 5466-355
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
