WOODWARD 5466-272控制主板卡件
1.产 品 介 绍
品牌:WOODWARD
型号说明:WOODWARD 5466-272控制主板卡件
优势:供应进口原装正品,专业停产配件。
公司主营特点:主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。
2.产 品 详 情 资 料:
外壳WOODWARD 5466-272 I/O单元的防护等级为IP20,每个单元都有单独的CE标记。如果需要更高的IP等级,则需要额外的机柜。通常,使用额外的机柜不会影响控制器的EMC特性。外壳安装在安装控制器外壳时,必须在外壳、墙壁和天花板之间提供一定的最小距离,以提供令人满意的通风。如果外壳配有可拆卸的壁包层,则必须确保其不会从与包含不属于AC 800M控制器及其连接的WOODWARD 5466-272 I/O的设备的其他外壳相邻的任何外壳上拆下。ABB机柜作为一个合适的外壳,ABB建议使用以下两个机柜,它们都特别适合安装WOODWARD 5466-272控制器和S800 I/O。两者均密封至IP54防护等级,可支持控制器和S800 I/O单元,无需额外的冷却设备:•RM550–落地式机柜•RE820–壁挂式机柜。有关ABB机柜的更多信息,请参阅附录C,推荐组件。WOODWARD 5466-272
Enclosures The WOODWARD 5466-272 I/O units hold protection class IP20, with each unit being individually CE-marked. If a higher IP class is required, an additional enclosure is needed.Normally the use of an additional enclosure will not influence the EMC characteristics of the controller. Enclosure Mounting When mounting the controller enclosure, it is important to provide certain minimum distances between the enclosure, the walls and the ceiling, in order to provide satisfactory ventilation. If the enclosure is provided with removable wall cladding, it is important to ensure that this is not removed from any enclosure adjacent to other enclosures containing equipment not belonging to the WOODWARD 5466-272Controller and its connected S800 I/O. ABB Cabinets As a suitable enclosure, ABB recommends the following two cabinets, both specially adapted for mounting the AC 800M Controller and S800 I/O. Both are sealed to protection class IP54 and can support the Controller and S800 I/O units with no requirement for additional cooling equipment: • RM550 – Floor-mounted cabinet • RE820 – Wall-mounted cabinet. For further information on ABB cabinets, see Appendix C, Recommended Components.WOODWARD 5466-272
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网,转载请附上此链接:http://www.jiangxidcs.com