WOODWARD 5466-042工控控制卡件
1.产 品 介 绍
品牌：WOODWARD
型号说明：WOODWARD 5466-042工控控制卡件
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
WOODWARD 5466-042控制软件AC 800M控制器使用的软件称为控制软件。此名称不代表特定的软件包；只是控制器中使用的功能范围的通用名称。这些功能由以下部件提供：•硬件功能（监控、通信总线、I/O总线）•加载到控制器中的固件功能（实时执行系统、实时时钟、冗余通信）•加载在控制器中的应用程序（库功能、通信协议）。要生成应用程序，WOODWARD 5466-042必须使用Control Builder M工具。该工具非常通用，除了系统配置外，还有许多有用的功能。PM8xx的以太网地址（PM891除外）每个TP830基板都有一个唯一的以太网地址，为每个CPU提供一个硬件标识。该功能采用驻留在TP830基板的非易失性存储器中的两个标识地址的形式。最低地址（12个字符的十六进制代码）位于贴在TP830基板上的不干胶标签上。剩下的地址是最低的+1。有关标签位置的详细信息，请参见第53页的图14。有关加载软件和使用以太网地址的详细信息，请参阅软件文档。WOODWARD 5466-042
Control Software The software used by the AC 800M Controller is named Control Software. This name does not stand for a specific software package; is merely a generic name for the scope of functions used in a controller. These functions are provided by: • Hardware functions (supervision, communication buses, I/O buses) • Firmware functions loaded into the controller (real time executive system, real time clock, redundant communication)WOODWARD 5466-042• Application programs loaded into the controller (library functions, communication protocols). To produce an application, it is necessary to use the Control Builder M tool. This tool is extremely versatile, having many useful functions in addition to system configuration.Ethernet Address for PM8xx (Except PM891) Each TP830 Baseplate is provided with a unique Ethernet address that provides every CPU with a hardware identity. This functionality takes the form of two identification addresses residing in the non-volatile memory of the TP830 Baseplate. The lowest address (a 12 character Hex code) is located on an adhesive label attached to the TP830 Baseplate. The remaining address is the lowest +1. See Figure 14 on page 53 for label location details. See software documentation for details on loading the software and using Ethernet address.WOODWARD 5466-042
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
