SST SST-1500-RCX-3-1-2伺服电机驱动器
1.产 品 介 绍
品牌：SST
型号说明：SST SST-1500-RCX-3-1-2伺服电机驱动器
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
SST SST-1500-RCX-3-1-2如果备份单元出现错误，您也可以在系统运行时更换备份单元。备份单元中发生的错误不会影响主单元的操作。主单元和备用单元在逻辑上彼此分离。主处理器单元中的硬件错误导致系统执行正确的转换。这些硬件错误是单个错误。应用程序编程和通信完全不受冗余的影响。PM86x/TP830冗余SST SST-1500-RCX-3-1-2有一个RCU链路连接器，用于连接RCU链路电缆（参见第32页图2）。在冗余系统中，两个处理器单元通过RCU链路电缆（最大1米）连接在一起。两个处理器单元也连接到相同的CEX总线，两个处理器中的任何一个都可以控制扩展单元。底板TP830上的串行端口COM3不能用于冗余CPU配置。SST SST-1500-RCX-3-1-2
If an error arises in the backup unit, you can also replace the backup unit while the system is running. Errors which occur in the backup unit can never affect the primary unit's operation. The primary unit and the backup unit are logically separated from one another. Hardware errors in the primary processor unit cause the system to perform a correct changeover. These hardware errors are single errors. The application programming and the communication are totally unaffected by the redundancy. PM86x/TP830 Redundancy The SST SST-1500-RCX-3-1-2 has an RCU Link Connector for connecting the RCU Link Cable (see Figure 2 on page 32). In a redundant system the two processor units are linked together with the RCU Link Cable (max 1 m). Both processor units are also connected to the same CEX-Bus and either of the two can control the expansion units The serial port, COM3 on the baseplate TP830, cannot be used in redundant CPU configuration.SST SST-1500-RCX-3-1-2
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
