RELIANCE 0-57408-D控制脉冲卡件
1.产 品 介 绍
品牌：RELIANCE
型号说明：RELIANCE 0-57408-D控制脉冲卡件
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
RELIANCE 0-57408-DRCU链路RCU链路电缆在主CPU和备用CPU之间传输数据。两个CPU连接到RCU链路电缆。RCU链路终端用于单CPU配置的RCU链路连接器。通过现场总线连接到控制器的远程I/O输入/输出单元。SELV安全特低电压（电源）。SIL安全完整性等级10BaseT 10 Mbit以太网，符合IEEE 802.3 100BaseTX 100 Mbit电气以太网IEEE 802.3欧洲联盟指令合规性本文件中提到的产品标有标志的装置符合电磁兼容性指令89/336/EEC和低压指令73/23/EEC。见附录D，RELIANCE 0-57408-D指令注意事项。如果产品标有UL标志，则本文件中提到的UL认证单位为UL认证单位。表示美国以及加拿大和美国的UL认证。徽标表示仅加拿大的UL认证。应用标准为UL508，工业控制设备。经批准用于危险场所的装置也符合UL60079-15标准。为了满足UL对危险场所的要求，必须遵守附录E“标准”中的说明。RELIANCE 0-57408-D
RCU Link RCU Link Cable transfers data between Primary and Back-up CPU. The two CPUs are connected to the RCU Link Cable. An RCU Link Terminator is used on the RCU Link Connector in single CPU configuration. Remote I/O Input/Output units connected to a controller via a fieldbus. SELV Safety Extra Low Voltage (power supply).RELIANCE 0-57408-DSIL Safety Integrity Level 10BaseT 10 Mbit Ethernet according to IEEE 802.3 100BaseTX 100 Mbit electrical Ethernet IEEE 802.3EUROPEAN UNION DIRECTIVE COMPLIANCE Units mentioned in this document for which the product is marked with the logo comply with the electromagnetic compatibility directive 89/336/EEC and the low-voltage directive 73/23/EEC. See Appendix D, Directive Considerations. UL LISTING Units mentioned in this document are UL listed if the product is marked with the UL logo. indicates UL approval for the USA, and for both Canada and the USA. The logo indicates UL approval for Canada only. The applied standard is UL508, Industrial Control Equipment. Units approved for use at hazardous locations also comply with the standard UL60079-15. To fulfill the UL requirements for hazardous locations, the instructions in Appendix E, Standards must be followed.RELIANCE 0-57408-D
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
