HONEYWELL 900RR0-0001数字量控制板卡
1.产 品 介 绍
品牌：HONEYWELL
型号说明：HONEYWELL 900RR0-0001数字量控制板卡
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
HONEYWELL 900RR0-0001符合EIA-232-D规范。注意，尽管EIA-232-D标准建议使用长度不超过50英尺（15m）的短互连电缆，但如果在接口点测量的总负载电容（包括信号终端）不超过2500pF，则允许使用更长的电缆。EIA-530标准定义了该接口的机械方面，HONEYWELL 900RR0-0001该接口用于同步和异步串行二进制数据的传输。它适用于平衡（双端）和不平衡（单端）信令，并提供了比具有相同DB25连接器的EIA-232-D更高的数据速率的可能性。表A-4列出了当端口通过串行接口模块配置为EIA-530 DCE或DTE端口时，串行端口B（前面板上的串行端口2）上可用的EIA-530互连。HONEYWELL 900RR0-0001
The HONEYWELL 900RR0-0001 conforms to EIA-232-D specifications. Note that although the EIA-232-D standard recommends the use of short interconnection cables not more than 50 feet (15m) in length, longer cables are permissible provided the total load capacitance measured at the interface point and including signal terminator does not exceed 2500pF.EIA-530 Connections The EIA-530 interface complements the EIA-232-D interface in function.HONEYWELL 900RR0-0001The EIA-530 standard defines the mechanical aspects of this interface, which is used for transmission of serial binary data, both synchronous and asynchronous. It is adaptable to balanced (double-ended) as well as unbalanced (single-ended) signaling and offers the possibility of higher data rates than EIA-232-D with the same DB25 connector. Table A-4 lists the EIA-530 interconnections that are available at serial port B (SERIAL PORT 2 on the front panel) when the port is configured via serial interface modules as an EIA-530 DCE or DTE port.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
