KEBA E-CPU-186B数字量控制板卡
1.产 品 介 绍
品牌:KEBA
型号说明:KEBA E-CPU-186B数字量控制板卡
优势:供应进口原装正品,专业停产配件。
公司主营特点:主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。
2.产 品 详 情 资 料:
KEBA E-CPU-186B当前支持的磁盘/磁带控制器模块的LUN。默认值为$0。网络自动引导设备LUN 00 Bug当前支持的磁盘/磁带设备的LUN。默认值为$0。这是网络引导序列在启动之前将延迟的时间(以秒为单位)。延迟的目的是允许您选择使用Break键停止引导。时间值从0到255秒。网络接口配置参数保存/保留在NVRAM中的地址;这些参数是执行无人值守网络引导所必需的参数。如果您正在为自己的程序信息或命令使用NVRAM空间,请将默认指针值更改为清除数据所需的值。如果您使用NIOT调试器命令,则网络接口配置参数需要保存/保留在NVRAM(非易失性RAM)中,也称为电池备份RAM(BBRAM),KEBA E-CPU-186B地址范围为$FFFC0000到$FFFC0FFF。NIOT参数的大小不超过128字节。这些参数的位置由ENV(将环境设置为错误/操作系统)调试器命令的设置确定。如果您将完全相同的空间用于自己的程序信息或命令,它们将被覆盖并丢失。KEBA E-CPU-186B
KEBA E-CPU-186B of a disk/tape controller module currently supported by the Bug. Default is $0. Network Auto Boot Device LUN 00 LUN of a disk/tape device currently supported by the Bug. Default is $0.This is the time in seconds that the Network Boot sequence will delay before starting the boot. The purpose for the delay is to allow you the option of stopping the boot by use of the Break key. The time value is from 0 through 255 seconds.The address where the network interface configuration parameters are to be saved/retained in NVRAM; KEBA E-CPU-186Bthese parameters are the necessary parameters to perform an unattended network boot. If you are using NVRAM space for your own program information or commands, change the default pointer value to the value necessary to clear your data.If you use the NIOT debugger command, the network interface configuration parameters need to be saved/retained in the NVRAM (Non-Volatile RAM), also known as Battery Backed up RAM (BBRAM), somewhere in the address range $FFFC0000 through $FFFC0FFF. The NIOT parameters do not exceed 128 bytes in size. The location for these parameters is determined by a setting of the ENV (Set Environment to Bug/Operating System) debugger command. If you have used the exact same space for your own program information or commands, they will be overwritten and lost.KEBA E-CPU-186B
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网,转载请附上此链接:http://www.jiangxidcs.com