B&R X20BR9300总线接收器模块单元
1.产 品 介 绍
品牌：B&R
型号说明：B&R X20BR9300总线接收器模块单元
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
B&R X20BR9300（终端端口1或01）（MVME162FXP2连接器上的端口2）。有时也称为“主机端口”，这是下载、上载、并发模式和透明模式的默认端口。注：这些逻辑端口号（0和1）在B&R X20BR9300模块的引脚中分别显示为“串行端口1”和“串行端口2”。物理上，它们都是连接器P2的一部分。它们也可在前面板DB-25连接器J15（用于端口1或A）和J9（用于端口2或B）上使用。输入和调试程序有多种方法可将用户程序输入系统内存以执行。一种方法是使用带有汇编器/反汇编器选项的内存修改（MM）命令创建程序。一次输入一行源代码。输入每一行源代码后，将对其进行汇编，并将目标代码加载到内存中。请参阅Motorola 68K CISC CPU用户手册的调试包，以了解162Bug组装器/拆卸器的完整详细信息。B&R X20BR9300
B&R X20BR9300EIA-232-D (Terminal Port 1 or 01) (PORT 2 on theB&R X20BR9300 P2 connector). Sometimes known as the "host port", this is the default for downloading, uploading, concurrent mode, and transparent modes. Note These logical port numbers (0 and 1) are shown in the pinouts of the MVME162FX module as "SERIAL PORT 1" and "SERIAL PORT 2", respectively. Physically, they are all part of connector P2. They are also available at the front panel DB-25 connectors J15 (for PORT 1 or A) and J9 (for PORT 2 or B).Entering and Debugging Programs There are various ways to enter a user program into system memory for execution. One way is to create the program using the Memory Modify (MM) command with the assembler/disassembler option. You enter the program one source line at a time. After each source line is entered, it is assembled and the object code is loaded to memory. Refer to the Debugging Package for Motorola 68K CISC CPUs User’s Manual for complete details of the 162Bug Assembler/Disassembler.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
