REXROTH HCS02.1E-W0028-A-03-NNNN伺服驱动器
1.产 品 介 绍
品牌：REXROTH
型号说明：REXROTH HCS02.1E-W0028-A-03-NNNN伺服驱动器
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
REXROTH HCS02.1E-W0028-A-03-NNNNMPCR在通电时包含$00，表示初始化尚未完成。随着初始化的进行，执行路径进入“prompt”例程。在发送提示之前，此例程在MPCR中放置一个R，以指示初始化已完成。然后发送提示。如果没有终端连接到该端口，MPCR仍被轮询，以查看外部处理器是否需要将控制传递到双端口RAM。如果终端确实响应，REXROTH HCS02.1E-W0028-A-03-NNNN则在轮询串行端口以获取用户输入时，MPCR也会出于相同的目的进行轮询。远程处理器放置在MPCR中的ASCII G表示请求Go Direct类型的传输。MPCR中的ASCII B表示在传输控制之前（与GO命令一样）要配置断点。在这两个序列中，MPCR中都放置了一个E，以指示在控制传递给RAM之前正在执行。注意，任何远程处理器都可以检查MPCR内容。REXROTH HCS02.1E-W0028-A-03-NNNN
The MPCR contains $00 at power-up, indicating that initialization is not yet complete. As the initialization proceeds, the execution path comes to the "prompt" routine. Before sending the prompt, this routine places an R in the MPCR to indicate that initialization is complete. Then the prompt is sent. If no terminal is connected to the port, REXROTH HCS02.1E-W0028-A-03-NNNNthe MPCR is still polled to see whether an external processor requires control to be passed to the dual-port RAM. If a terminal does respond, the MPCR is polled for the same purpose while the serial port is being polled for user input. An ASCII G placed in the MPCR by a remote processor indicates that the Go Direct type of transfer is requested. An ASCII B in the MPCR indicates that breakpoints are to be armed before control is transferred (as with the GO command). In either sequence, an E is placed in the MPCR to indicate that execution is underway just before control is passed to RAM. Note that any remote processor could examine the MPCR contents.REXROTH HCS02.1E-W0028-A-03-NNNN
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
