REXROTH MSK050C-0600-NN-M1-UP1-NNNN伺服电机
1.产 品 介 绍
品牌：REXROTH
型号说明：REXROTH MSK050C-0600-NN-M1-UP1-NNNN伺服电机
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
REXROTH MSK050C-0600-NN-M1-UP1-NNNN当观察任何162Bug命令的输出时，如果启用了XON/XOFF协议（默认），则可以输入对终端端口有效的XON和XOFF字符来控制输出。162Bug将这些字符分别初始化为^S和^Q，但您可以使用PF命令更改它们。在初始化（默认）模式下，操作如下：磁盘I/O支持162Bug可以通过VMEbus与智能磁盘控制器模块通信来启动磁盘输入/输出。REXROTH MSK050C-0600-NN-M1-UP1-NNNN162Bug中内置的磁盘支持设施包括命令级磁盘操作、供用户程序使用的磁盘I/O系统调用（仅通过TRAP#15指令之一）以及为磁盘参数定义的数据结构。162Bug将模块映射的地址、连接到控制器模块的设备类型和数量等参数保存在表中。这些参数的默认值在通电和冷启动重置时分配，但可以按照本章稍后关于默认参数的章节所述进行更改。REXROTH MSK050C-0600-NN-M1-UP1-NNNN
When observing output from any 162Bug command, the XON and XOFF characters which are in effect for the terminal port may be entered to control the output, if the XON/XOFF protocol is enabled (default). These characters are initialized to ^S and ^Q respectively by 162Bug, but you may change them with the PF command. In the initialized (default) mode,REXROTH MSK050C-0600-NN-M1-UP1-NNNNoperation is as follows:Disk I/O Support 162Bug can initiate disk input/output by communicating with intelligent disk controller modules over the VMEbus. Disk support facilities built into 162Bug consist of command-level disk operations, disk I/O system calls (only via one of the TRAP #15 instructions) for use by user programs, and defined data structures for disk parameters. Parameters such as the address where the module is mapped and the type and number of devices attached to the controller module are kept in tables by 162Bug. Default values for these parameters are assigned at power-up and cold-start reset, but may be altered as described in the section on default parameters, later in this chapter.REXROTH MSK050C-0600-NN-M1-UP1-NNNN
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
