REXROTH NFD03.1-480-055伺服控制系统
1.产 品 介 绍
品牌：REXROTH
型号说明：REXROTH NFD03.1-480-055伺服控制系统
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
VMEbus上的其他MPU可以中断、禁用、与处理器通信并确定处理器的操作状态。GCSR（全局控制/状态寄存器）集合的一个寄存器包括四个位，这些位用作位置监视器，以允许一个REXROTH NFD03.1-480-055处理器向任何其他MVME162FX处理器广播信号。所有八个寄存器均可从任何本地处理器以及VMEbus访问。REXROTH NFD03.1-480-055通过位于J4附近的1A保险丝（F1）向远程LED/开关连接器（J4）提供+5 Vdc电源。接头J4是远程控制和指示面板的接口。如果LED都不亮，且ABORT和RESET开关不工作，检查保险丝F1。REXROTH NFD03.1-480-055通过位于二极管CR1附近的1A保险丝（F2）向以太网收发器接口提供+12 Vdc电源。FUSE LED灯指示+12 Vdc可用。使用MVME712M模块时，当LAN电源可用时，REXROTH NFD03.1-480-055上的黄色DS1 LED点亮，这表明保险丝良好。如果以太网收发器无法工作，请检查保险丝F2。
Other MPUs on the VMEbus can interrupt, disable, communicate with, and determine the operational status of the processor(s). One register of the GCSR (global control/status register) set includes four bits that function as location monitors to allow one REXROTH NFD03.1-480-055 processor to broadcast a signal to any other MVME162FX processors. All eight registers are accessible from any local processor as well as from the VMEbus. The MVME162FX provides +5 Vdc power to the remote LED/switch connector (J4) through a 1A fuse (F1) located near J4. Connector J4 is the interface for a remote control and indicator panel. If none of the LEDs light and the ABORT and RESET switches do not operate, check fuse F1. TheREXROTH NFD03.1-480-055 provides +12 Vdc power to the Ethernet transceiver interface through a 1A fuse (F2) located near diode CR1. The FUSE LED lights to indicate that +12 Vdc is available. When the MVME712M module is used, the yellow DS1 LED on the REXROTH NFD03.1-480-055 illuminates when LAN power is available, which indicates that the fuse is good. If the Ethernet transceiver fails to operate, check fuse F2.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
