REXROTH DKC14.3-040-7-FW伺服驱动器
1.产 品 介 绍
品牌：REXROTH
型号说明：REXROTH DKC14.3-040-7-FW伺服驱动器
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
REXROTH DKC14.3-040-7-FW注：某些VME背板（如摩托罗拉“模块化机箱”系统中使用的背板）具有自动跳转功能，用于自动传播IACK和BG信号。步骤7不适用于这种背板设计。7.在机箱背板上，从控制器占用的卡插槽的标头中卸下中断确认（IACK）和总线授权（BG）跳线。8.将P2适配器板或LCP2适配器板和电缆连接到控制器的背板连接器P2。这为EIA-232-D串行端口、REXROTH DKC14.3-040-7-FWSCSI端口和LAN以太网端口处的终端或其他外围设备提供了连接点。有关安装P2或LCP2适配器板和MVME712系列转换模块的信息，请参阅附录F中相关文档中列出的手册。请注意，《MVME162FX嵌入式控制器程序员参考指南》提供了一些连接图。9.将适当的电缆连接到串行端口、SCSI端口和LAN以太网端口的面板连接器。REXROTH DKC14.3-040-7-FW
Note Some VME backplanes (e.g., those used in Motorola ‘‘Modular Chassis’’ systems) have an autojumpering feature for automatic propagation of the IACK and BG signals. Step 7 does not apply to such backplane designs. 7. On the chassis backplane, remove the INTERRUPT ACKNOWLEDGE (IACK) and BUS GRANT (BG) jumpers from the header for the card slot occupied by the controller. 8. Connect the P2 Adapter Board or LCP2 Adapter Board and cable(s) to controller’s REXROTH DKC14.3-040-7-FWbackplane connector P2. This provides a connection point for terminals or other peripherals at the EIA-232-D serial ports, SCSI ports, and LAN Ethernet port. For information on installing the P2 or LCP2 Adapter Board and the MVME712 series transition module(s), refer to the manuals listed in Related Documentation in Appendix F. Note that the MVME162FX Embedded Controller Programmer’s Reference Guide provides some connection diagrams. 9. Connect the appropriate cable(s) to the panel connectors for the serial ports, SCSI port, and LAN Ethernet port.REXROTH DKC14.3-040-7-FW
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
