REXROTH DKC143-100-7-FW伺服驱动器
1.产 品 介 绍
品牌：REXROTH
型号说明：REXROTH DKC143-100-7-FW伺服驱动器
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
如果您不打算将REXROTH DKC143-100-7-FW用作系统控制器，它可能会占用任何未使用的双倍高度卡插槽。4.将控制器滑入所选卡槽。确保模块正确安装在背板上的P1和P2连接器中。不要损坏或弯曲接头针脚。5.使用提供的螺钉将控制器固定在机箱中，与横向安装导轨保持良好接触，以尽量减少射频发射。6.将REXROTH DKC143-100-7-FW系列转换模块安装在VME机箱的前部或后部。请注意，要安装MVME712M（具有双宽前面板），您可能需要移动机箱中的其他模块。注意：如果您打算在EIA-530配置或EIA-485/EIA422配置中使用带有端口B的MVME162FX嵌入式控制器，请不要安装P2或LCP2适配器板和REXROTH DKC143-100-7-FW系列转换模块。它们与EIA-530接口和EIA485/EIA-422接口不兼容。有关更多信息，请参阅第1章“功能说明”中的MVME162FX串行端口2。
If you do not intend to use the REXROTH DKC143-100-7-FW as system controller, it can occupy any unused double-height card slot. 4. Slide the controller into the selected card slot. Be sure the module is seated properly in the P1 and P2 connectors on the backplane. Do not damage or bend the connector pins. 5. Secure the controller in the chassis with the screws provided, making good contact with the transverse mounting rails to minimize RF emissions. 6. Install the REXROTH DKC143-100-7-FW series transition module in the front or the rear of the VME chassis. Note that to install an MVME712M (which has a double-wide front panel) you may need to shift other modules in the chassis. Note If you intend to use the MVME162FX Embedded Controller with Port B in an EIA-530 configuration or an EIA-485/EIA422 configuration, do not install the P2 or LCP2 Adapter Board and the MVME712 series transition module. They are incompatible with the EIA-530 interface and the EIA485/EIA-422 interface. Refer to REXROTH DKC143-100-7-FW Serial Port 2 in Chapter 1, Functional Description for additional information.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
