RELIANCE 0-51865-16控制脉冲卡件
1.产 品 介 绍
品牌：RELIANCE
型号说明：RELIANCE 0-51865-16控制脉冲卡件
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
SRAM电池备用电源选择头（J20）RELIANCE 0-51865-16嵌入式控制器在工厂配置为使用VMEbus+5V备用电源作为SRAM的备用电源（跳线安装在引脚1和3以及引脚2和4之间）。要选择车载电池作为备用电源，请在针脚3和5以及针脚4和6之间安装跳线。注意：对于没有可选VMEbus接口（没有VMEchip2 ASIC）的RELIANCE 0-51865-16，您必须选择板载电池作为备用电源！注意：移除所有跳线可能会暂时禁用控制器的SRAM。除存储器.EPROM大小选择头（J21）外，不要移除J20上的所有跳线。RELIANCE 0-51865-16嵌入式控制器出厂时配置为4Mbit EPROM（跳线安装在引脚2和3之间）。要为8Mbit EPROM配置MVME162FX，请在引脚1和2之间安装跳线。RELIANCE 0-51865-16
SRAM Battery Backup Source Select Header (J20) The RELIANCE 0-51865-16 Embedded Controller is factory configured to use VMEbus +5V standby power as a backup power source for the SRAM (jumpers are installed across pins 1 and 3 and 2 and 4). To select the onboard battery as the backup power source, install the jumpers across pins 3 and 5 and 4 and 6. Note For RELIANCE 0-51865-16 without optional VMEbus interface (without VMEchip2 ASIC), you must select the onboard battery for the backup power source. ! Caution Removing all jumpers may temporarily disable the controller’s SRAM. Do not remove all jumpers from J20, except for storage.EPROM Size Select Header (J21) TheRELIANCE 0-51865-16 Embedded Controller is factory-configured for a 4Mbit EPROM (a jumper is installed across pins 2 and 3). To configure the MVME162FX for an 8Mbit EPROM, install the jumper across pins 1 and 2.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
