RELIANCE 0-52850印刷电路板
1.产 品 介 绍
品牌：RELIANCE
型号说明：RELIANCE 0-52850印刷电路板
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
RELIANCE 0-52850串行端口1/控制台的同步时钟选择标头（J11）MVME162FX嵌入式控制器出厂时，串行端口1/Console标头配置为异步通信（已移除跳线）。为选择串行端口1/CONSOLE连接的同步通信，在串行端口2的引脚1和2以及引脚3和4时钟选择头（J12）之间安装跳线。RELIANCE 0-52850嵌入式控制器出厂时，串行端口2头配置为异步通信（即，拆除跳线）。要选择串行端口2连接的同步通信，请在引脚1和2以及引脚3和4之间安装跳线。如果将MVME712M与控制器一起使用，请如上所示配置RELIANCE 0-52850。有关更多信息，请参阅第1章中的RELIANCE 0-52850章节。
Synchronous Clock Select Header (J11) for Serial Port 1/Console The RELIANCE 0-52850 Embedded Controller is shipped from the factory with the SERIAL PORT 1/CONSOLE header configured for asynchronous communications (jumpers removed). To select synchronous communications for the SERIAL PORT 1/CONSOLE connection, install jumpers across pins 1 and 2 and pins 3 and 4 Clock Select Header (J12) for Serial Port 2 The MVME162FX Embedded Controller is shipped from the factory with the SERIAL PORT 2 header configured for asynchronous communications (i.e., jumpers removed). To select synchronous communications for the SERIAL PORT 2 connection, install jumpers across pins 1 and 2 and pins 3 and 4. If you are using a RELIANCE 0-52850 with the controller, configure the MVME712M as shown above. Refer to the RELIANCE 0-52850 section in Chapter 1 for additional information.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
