RELIANCE 57C-435数字量输入卡件
1.产 品 介 绍
品牌：RELIANCE
型号说明：RELIANCE 57C-435数字量输入卡件
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
RELIANCE 57C-435安装新SIMM 1。观察SIMM接头J1和控制器接头J10上接头键的方向。转动SIMM，使键对齐，并将其轻轻地放在连接器J10上，使SIMM角（或中心）处的安装孔与控制器上的匹配支座对齐。2.轻轻按压SIMM的顶部，使其位于连接器上。如果SIMM没有轻轻按压，则重新检查方向。如果SIMM连接器方向不正确，安装孔将不会与支座对齐！注意：为防止损坏SIMM，如果方向不正确，请勿强行打开SIMM。RELIANCE 57C-4353.将一个或两个（根据需要）4-40 x 3/16“十字头螺钉（之前已拆除或随新SIMM一起提供）插入中心或对角安装孔。将螺钉安装到支座中，但不要过度拧紧。图示了端口A和B可用的各种串行配置中的信号关系和信号连接RELIANCE 57C-435
Installation of New SIMM 1. Observe the orientation of the connector keys on the SIMM connector J1 and on the controller connector J10.RELIANCE 57C-435 Turn the SIMM so that the keys are lined up and place it gently on connector J10, aligning the mounting hole(s) at the SIMM corners (or center) with the matching standoff(s) on the controller. 2. Gently press the top of the SIMM to seat it on the connector. If the SIMM does not seat with gentle pressure, recheck the orientation. If the SIMM connector is oriented incorrectly, the mounting hole(s) will not line up with the standoff(s). ! Caution To prevent damage to the SIMM, do not force the SIMM on if it is oriented incorrectly. 3. Insert one or two (as required) 4-40 x 3 /16” phillips-head screw(s) (that were previously removed or supplied with the new SIMM) into the center or opposite corner mounting hole(s). Install the screw(s) into the standoff(s), but do not overtighten.RELIANCE 57C-435The signal relationships and signal connections in the various serial configurations available for ports A and B are illustratedRELIANCE 57C-435
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
