RELIANCE 57C440以太网接口模块
1.产 品 介 绍
品牌：RELIANCE
型号说明：RELIANCE 57C440以太网接口模块
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
RELIANCE 57C440显示了控制器上开关、跳线头、连接器和指示灯的位置。控制器已进行出厂测试，出厂时带有以下章节所述的默认出厂跳线设置。控制器使用所需的工厂安装调试监视器RELIANCE 57C440Bug（162Bug）以及这些工厂跳线设置进行操作。下表列出了手动可配置项目。系统控制器选择标题（J1）RELIANCE 57C440嵌入式控制器在工厂通过跨J1引脚1和2的跳线配置为VMEbus系统控制器。如果通过将跳线移动到J1针脚2和3来选择“自动”系统控制器功能，则控制器将根据其在总线上的位置来确定其是否为系统控制器。如果板位于从左起的第一个插槽中，则将其自身配置为“系统控制器”。如果RELIANCE 57C440在任何情况下都不能充当系统控制器，请从J1上拆下跳线。当控制器用作系统控制器时，SCON LED亮起。RELIANCE 57C440
shows the locations of the switches, jumper headers, connectors, and LEDs on the controller. The controller has been factory tested and is shipped with the default factory jumper settings described in the following sections. The controller operates with its required and factory-installed debug monitor, MVME162Bug (162Bug), with these factory jumper settings. Manually configurable items are listed in the following table.System Controller Select Header (J1) The RELIANCE 57C440 Embedded Controller is factory-configured as a VMEbus system controller by a jumper across J1 pins 1 and 2. If you select the “automatic’’ system controller function by moving the jumper to J1 pins 2 and 3, the controller determines whether it is the system controller by its position on the bus. If the board is in the first slot from the left, it configures itself as the “system controller”. If the RELIANCE 57C440 is not to act as the system controller under any circumstances, remove the jumper from J1. When the controller is functioning as system controller, the SCON LED is turned on.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
