RELIANCE 57C424高速链路
1.产 品 介 绍
品牌：RELIANCE
型号说明：RELIANCE 57C424高速链路
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
RELIANCE 57C424开箱说明！注意：为防止静电放电损坏控制器，请避免触摸电路板的表面和部件。静电放电会损坏集成电路和其他静电敏感元件。注意：如果装运纸箱在收到时损坏，请在开箱和检查设备时要求承运人的代理人在场。将设备从装运纸箱中取出。参考装箱单，确认所有项目都存在。保存包装材料，以便储存和重新装运设备。将设备放置在清洁且充分保护的工作表面上。硬件准备2为了确保RELIANCE 57C424嵌入式控制器的正常运行，安装前可能需要对某些选项进行修改。控制器为大多数这些选项提供软件控制。在控制器安装在系统中之后，通过在控制寄存器中设置位来执行修改。有关RELIANCE 57C424寄存器的更多信息，请参阅附录F中列出的《RELIANCE 57C424Embedded Controller编程器参考指南》。注意，某些选项无法在软件中设置；可通过安装或移除接头跳线或接口模块对其进行修改。
Unpacking Instructions ! Caution To prevent static discharge damage to the controller, avoid touching the surface and components of the circuit board. Static discharge can damage integrated circuits and other static sensitive components. Note If the shipping carton is damaged upon receipt, request the carrier’s agent to be present during unpacking and inspection of equipment. Unpack the equipment from the shipping carton. Refer to the packing list and verify that all items are present. Save the packing material for storing and reshipping the equipment. Place the equipment on a clean and adequately protected working surface.Hardware Preparation 2 To ensure proper operation of the RELIANCE 57C424 Embedded Controller, modifications to certain options may be necessary before installation. The controller provides software control for most of these options. Modifications are performed by setting bits in control registers after the controller has been installed in a system. For additional information onRELIANCE 57C424registers, refer to the RELIANCE 57C424 Embedded Controller Programmer’s Reference Guide listed in Appendix F. Note that Some options cannot be set in the software; these are modified by installing or removing header jumpers or interface modules.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
