RELIANCE 0-51385数字量控制板卡
1.产 品 介 绍
品牌：RELIANCE
型号说明：RELIANCE 0-51385数字量控制板卡
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
连接器RELIANCE 0-51385嵌入式控制器有两个96位DIN连接器：P1和P2。P1行A、B、C和P2行B提供VMEbus互连。P2行A和C提供到SCSI总线、串行端口和以太网的连接。控制器上的串行端口还连接到前面板上的两个25针DB-25阴连接器J9和J15。四个IP通过四对50针连接器连接到控制器。前面板后面的四个50针连接器用于与IP信号的外部连接。内存芯片夹层板插入两个40针连接器。远程状态和控制远程状态和控制器连接器J4是一个位于控制器前面板后面的20针连接器。RELIANCE 0-51385它为系统设计者提供了访问关键指示器和重置功能的灵活性。当控制器封装在机箱中且前面板不可见时，此连接器允许将RESET（重置）、ABORT（中止）和LED（发光二极管）功能扩展到系统的控制面板，使其可见。或者，这允许系统设计者构建一个RESET/ABORT/LED面板，该面板可以位于远离控制器的位置。RELIANCE 0-51385
Connectors The RELIANCE 0-51385 Embedded Controller has two 96-position DIN connectors: P1 and P2. P1 rows A, B, C, and P2 row B provide the VMEbus interconnection. P2 rows A and C provide the connection to the SCSI bus, serial ports, and Ethernet. The serial ports on the controller are also connected to two 25-pin DB-25 female connectors J9 and J15 on the front panel. The four IPs connect to the controller by four pairs of 50-pin connectors. Four 50-pin connectors behind the front panel are for external connections to IP signals. The memory chip mezzanine board is plugged into two 40-pin connectors. Remote Status and Control The remote status and control connector, J4, is a 20-pin connector located behind the front panel of the controller.RELIANCE 0-51385 It provides system designers with flexibility in accessing critical indicator and reset functions. When the controller is enclosed in a chassis and the front panel is not visible, this connector allows the RESET, ABORT, and LED functions to be extended to the control panel of the system, where they are visible. Alternatively, this allows a system designer to construct a RESET/ABORT/LED panel that can be located remotely from the controller.RELIANCE 0-51385
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
