HAAS 32-5550J伺服放大器
1.产 品 介 绍
品牌：HAAS
型号说明：HAAS 32-5550J伺服放大器
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
HAAS 32-5550J每个具有以太网接口的控制器都分配了一个以太网站地址。地址为$08003E2xxxxx，其中xxxxx是分配给电路板的唯一5个半字节数（即，每个控制器的xxxxx值不同）。HAAS 32-5550J每个板都有一个以太网站地址显示在VMEbus P2连接器上的标签上。此外，包括以太网地址在内的六个字节存储在BBRAM的配置区域中。也就是说，08003E2xxxxx存储在BBRAM中。在$FFFC1F2C地址处，可以读取上四个字节（08003E2x）。在地址$FFFC1F30处，可以读取下两个字节（xxxx）。控制器的调试器能够检索或设置以太网地址。如果BBRAM中的数据丢失，用户应使用VMEbus P2连接器标签上的数字进行恢复。以太网收发器接口位于MVME162FX控制器上，行业DB15标准连接器位于MVME712x转接板上。HAAS 32-5550J
HAAS 32-5550JEvery controller that has the Ethernet interface is assigned an Ethernet Station Address. The address is $08003E2xxxxx where xxxxx is the unique 5-nibble number assigned to the board (i.e., every controller has a different value for xxxxx). Each board has an Ethernet Station Address displayed on a label attached to the VMEbus P2 connector. In addition, the six bytes including the Ethernet address are stored in the configuration area of the BBRAM. That is, 08003E2xxxxx is stored in the BBRAM. At an address of $FFFC1F2C, the upper four bytes (08003E2x) can be read. At an address of $FFFC1F30, the lower two bytes (xxxx) can be read. The controller’s debugger has the capability to retrieve or set the Ethernet address. If the data in the BBRAM is lost, the user should use the number on the VMEbus P2 connector label to restore it.HAAS 32-5550JThe Ethernet transceiver interface is located on the MVME162FX controller, and the industry DB15 standard connector is located on the MVME712x transition board.HAAS 32-5550J
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
