RELIANCE 45C-200A控制板
1.产 品 介 绍
品牌：RELIANCE
型号说明：RELIANCE 45C-200A控制板
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
请勿将外围设备连接到RELIANCE 45C-200A转换模块上的端口1、端口3或Centronics打印机端口。在EIA-232-D情况下，这些端口均未连接到任何MVME162电路。在EIA-530的情况下，尝试使用这些端口会产生某些连接，有可能损坏RELIANCE 45C-200A或外围设备！警告：使用EIA-530 SIMM或EIA-485/EIA-422 SIMM时，请勿将RELIANCE 45C-200A嵌入式控制器连接到MVME712x板。P2适配器和转接板不支持EIA-530、EIA-485和EIA-422信号。工业封装（IP）接口MVME162FX嵌入式控制器上的IP2芯片ASIC支持四个工业封装（IP）接口：可从前面板访问。IP2还包括四个DMA信道（每个IP一个，或每个双尺寸IP两个）、32MHz或8MHz工业组时钟选择（跳线可选）和一个连接到四个接口的可编程时基选通。RELIANCE 45C-200A
Do not connect peripheral devices to Port 1, Port 3, or the Centronics printer port on the RELIANCE 45C-200A transition module. In the EIA-232-D case, none of these ports are connected to any MVME162 circuits. In the EIA-530 case, attempting to use these ports would produce certain connections with the potential to damage the MVME162 or the peripherals. ! Caution When using an EIA-530 SIMM or an EIA-485/EIA-422 SIMM, do not connect the MVME162FX Embedded Controller to an RELIANCE 45C-200A board. The EIA-530, EIA-485, and EIA-422 signals are not supported by the P2 adapter and the transition boards.Industry Pack (IP) Interfaces The IP2 chip ASIC on the RELIANCE 45C-200A Embedded Controller supports four Industry Pack (IP) interfaces: these are accessible from the front panel. The IP2 also includes four DMA channels (one for each IP, or two for each double size IP), 32MHz or 8MHz Industry Pack clock selection (jumper selectable), and one programmable timebase strobe which is connected to the four interfaces.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
