RELIANCE 45C363数字量输入卡件
1.产 品 介 绍
品牌：RELIANCE
型号说明：RELIANCE 45C363数字量输入卡件
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
RELIANCE 45C363第2章中的（表1和表2）说明了当控制器与RELIANCE 45C363一起使用时端口A可用的两种配置。图2-5（表1和表2）显示了当控制器RELIANCE 45C363使用时，端口A可用的两种配置。RELIANCE 45C363串行端口2 Z85230的B端口配置通过安装在控制器连接器J10上的串行接口模块（SIMM）确定。有五个SIMMS可用：标记为SERIAL PORT 2的DB-9连接器或前面板上的RJ-11插孔。串行端口2硬接线为EIA-232-D DTE；RJ-11插孔使用内置调制解调器。在RELIANCE 45C363上设置跳线头J16和J17可将输出配置为串行端口2处的EIA-232-D DTE或RJ-11插孔处的调制解调器。DB-9连接器在前面板上标记为串行端口1。串行端口2硬接线为EIA-232-D DTE端口。DB-25连接器在前面板上标记为串行端口2。串行端口2可以通过跳线头J16和J17配置为EIA-232-D DTE或DCE端口。RELIANCE 45C363
(sheets 1 and 2) in Chapter 2 illustrates the two configurations available for Port A when the controller is used with an MVME712M. Figure 2-5 (sheets 1 and 2) shows the two configurations available for Port A when the controller is used RELIANCE 45C363. MVME162FX Serial Port 2 The configuration of B port of the RELIANCE 45C363 is determined via a Serial Interface Module (SIMM) which is installed at connector J10 on the controller. There are five SIMMS available:The DB-9 connector marked SERIAL PORT 2 OR the RJ-11 jack on the front panel. SERIAL PORT 2 is hardwired as EIA-232-D DTE; the RJ-11 jack utilizes the built-in modem. Setting the jumper headers J16 and J17 on the MVME712AM/-13 configures the output as EIA-232-D DTE at SERIAL PORT 2 or as a modem at the RJ-11 jack.The DB-9 connector marked SERIAL PORT 2 on the front panel. SERIAL PORT 2 is hardwired as an EIA-232-D DTE port.The DB-25 connector marked SERIAL PORT 2 on the front panel. SERIAL PORT 2 can be configured as an EIA-232- D DTE or DCE port, via jumper headers J16 and J17.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
