RELIANCE S-25004-1模块卡件
1.产 品 介 绍
品牌：RELIANCE
型号说明：RELIANCE S-25004-1模块卡件
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
RELIANCE S-25004-1模块卡件安装新电池之前，请确保电池针脚清洁。记下电池极性，然后将电池压入插座。注意，当电池在插座中时，不需要焊接。EPROM和闪存MVME162FX嵌入式控制器的设计包含1MB闪存（一个8Mbit闪存设备，组织为1M x 8）。有关闪存编程的更多信息，请参阅附录F中列出的Intel文档。闪存写入启用由MC2芯片中闪存访问时间控制寄存器中的一位控制。有关更多信息，请参阅《MVME162FX嵌入式控制器程序员参考指南》。RELIANCE S-25004-1模块卡件位置是一个标准JEDEC 32引脚PLCC，能够以512KB x 8器件的形式组织4 Mbit密度。根据跳线设置（GPI3，J22上的引脚9-10），可以从闪存（已安装GPI3）或EPROM（已移除GPI3）获取MC68xx040重置代码。RELIANCE S-25004-1模块卡件
Before installing a new battery, ensure that the battery pins are clean. Note the battery polarity and press the battery into the socket. Note that when the battery is in the socket, no soldering is required. EPROM and Flash The MVME162FX Embedded Controller’s design incorporates 1MB of flash memory (an 8-Mbit flash device organized as a 1M x 8). RELIANCE S-25004-1模块卡件Refer to the Intel documents listed in Appendix F for additional information on programming flash memory, The flash write enable is controlled by a bit in the Flash Access Time Control Register in the MC2 chip. Refer to the MVME162FX Embedded Controller Programmer’s Reference Guide for additional information. The EPROM location is a standard JEDEC 32-pin PLCC capable of 4 Mbit densities organized as a 512KB x 8 device. Depending on the jumper setting (GPI3, pins 9-10 on J22), the MC68xx040 reset code can be fetched from either the flash (GPI3 installed) or EPROM (GPI3 removed).RELIANCE S-25004-1模块卡件
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
