RELIANCE 65C500工控DCS系统
1.产 品 介 绍
品牌：RELIANCE
型号说明：RELIANCE 65C500工控DCS系统
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
RELIANCE 65C500为了支持此功能，VMEchip2中的某些逻辑已在MC2芯片中复制。如果VMEchip2存在，则MC2芯片中禁止该逻辑。这些功能的启用由软件和MC2芯片硬件初始化控制。请注意，RELIANCE 65C500型号附带闪存空白（工厂使用VMEbus使用调试器代码对闪存进行编程）。要使用162Bug包MVME162Bug，请确保为EPROM内存映射配置了跳线头J22。更多详情请参阅第3章和第4章。有关订购信息，请联系您当地的摩托罗拉销售办事处。内存选项以下内存选项用于不同版本的MVME162FX嵌入式控制器。DRAM选项控制器的设计允许4MB、8MB或16MB DRAM选项。DRAM架构对于4MB和8MB是非交错的，而16MB架构是交错的。4MB DRAM选件完全位于控制器的基板上；8MB和16MB选项在夹层模块上包括4MB或12MB。内存没有奇偶校验保护。RELIANCE 65C500
To support this feature, certain logic in the VMEchip2 has been duplicated in the MC2 chip. This logic is inhibited in the MC2 chip if the VMEchip2 is present. The enables for these functions are controlled by software and MC2 chip hardware initialization. Note that RELIANCE 65C500 models ordered without the VMEbus interface are shipped with a flash memory blank (the factory uses the VMEbus to program the flash memory with debugger code). To use the 162Bug package, MVME162Bug, be sure that jumper header J22 is configured for the EPROM memory map. Refer to Chapters 3 and 4 for further details. For ordering information, contact your local Motorola sales office.Memory Options The following memory options are used on the different versions of the MVME162FX Embedded Controller. DRAM Options The controller’s design allows a 4MB, 8MB, or 16MB DRAM option. The DRAM architecture is non-interleaved for 4MB and 8MB, while the 16MB architecture is interleaved. The 4MB DRAM option is located entirely on the controller’s base board; the 8MB and 16MB options include 4MB or 12MB on a mezzanine module. The memory is not parity protected.RELIANCE 65C500
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
